Dram Timing Control - Asus H81M-CR2.0 User Manual

Motherboard
Hide thumbs Also See for H81M-CR2.0:
Table of Contents

Advertisement

2.5.5
DRAM Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the BCLK/
PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.5.6
Max. CPU Graphics Ratio [Auto]
[Auto]
The iGPU frequency is set to its optimized setting depending on the system
loading.
[Manaul]
Use the <+> or <-> keys to adjust the optimal iGPU frequency value. The
frequency may vary depending on the system loading.
2.5.7
GPU Boost [As is]
Allows you to enable the GPU Boost to accelerate the integrated GPU for extreme graphics
performance. Configuration options: [As is] [Enabled].
2.5.8
EPU Power Saving Mode [Auto]
Allows you to enable or disable the EPU power saving function. Configuration options: [Auto]
[Disabled] [Enabled]
2.5.9

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the <+> and <->
keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the
<Enter> key.
Changing the values in this menu may cause the system to become unstable! If this happens,
revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [63 DRAM Clock]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1 DRAM Clock] [2 DRAM Clock] [3 DRAM Clock]
ASUS H81M-C R2.0
2-15

Advertisement

Table of Contents
loading

Table of Contents