System Operation - JTS UR-816D Instruction Manual

6. System Operation

Be sure to mute the audio signal of a mixer or amplifier before turning on the
receiver and transmitter.
(1) Power on
Turn AF level on the receiver completely counter-clockwise to the minimum
level, and switch on the receiver. As soon as you turn power
on, the power LED
light up to indicate the system is ready for operating.
2 3
It is always a good idea to keep "open space" between transmitter and
receiver, that will improve RF reception.
(2) Selecting channel for the receiver and transmitter
1. Use the supplied screwdriver to select a desired channel for the receiver
and transmitters
16 channels.
2. Make sure the channel of receiver matches that of the transmitter.
3. When 2 or more system are being used in the same location, they must be
set up to use different channels. If existing channel is being interfered, please
change to another non-interference channel.
11 MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
3
lights red, meanwhile the RF
5 6
4
. Both receiver and transmitters are preprogrammed with
4
2
of the receiver
5
signal and AF
2 5
PLL SINGLE CHANNEL DIVERSITY RECEIVER
UR-816DB
RF
POWER CH
9
13 AF
6
4
6
LED
VOL.
MIN. MAX.
4