Cancel 24P Mode (Hdr-Cx900E/Fdr-Ax100E); Calibration - Sony Handycam FDR-AX100 Help Manual

1. - [Setup] - [
If you want to return the system to 50i mode, select
screen.
Note
This product reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to AVCHD 24p (FX, FH), XAVC S HD 24p and XAVC S 4K
24p (FDR-AX100E).
Depending on the connected TV, images may not be played back normally because the video signal
output from this product is in the NTSC format.
You cannot set [
How to Use Menu operations

Cancel 24p Mode (HDR-CX900E/FDR-AX100E)

Return the system to 50i mode by canceling 24p mode.
1. - [Setup] - [
How to Use Menu operations

Calibration

Use this function if the buttons on the touch panel does not work correctly.
1. - [Setup] - [
2. Touch "×" displayed on the LCD monitor with the corner of memory card or the like 3
times.
General Settings] - [24p Mode] -
Frame Rate].
Setup
General Settings] - [Cancel 24p Mode] -
Setup
General Settings] - [Calibration].
.
in the [Cancel 24p Mode]
.
142