Operations While The Alarm Sound Is Playing - Yamaha Micro-Chaine MCR-042 Owner's Manual

Hide thumbs Also See for Micro-Chaine MCR-042:
Table of Contents

Advertisement

Available languages

Available languages

USEFUL FUNCTIONS
Switching the alarm on/off

Operations while the alarm sound is playing

When the set time arrives, the selected alarm sound will play. During playback, the following operations are available.
To pause the alarm (Snooze)
To turn the alarm off
18
En
Press ALARM to turn the alarm on/off.
When the alarm is on, the alarm indicator (
and the alarm time will be shown. If you press ALARM
again, the alarm indicator (
off.
If the Option menu item POWER SAVING is set to ECO, the
alarm will not function (☞ P. 15).
Press SNOOZE/SLEEP.
Snooze will stop the alarm and play it again 5 minutes later.
• If SOURCE + BEEP is set as the alarm type, you can press
SNOOZE/SLEEP once to stop the beep sound, and twice to stop
the audio source.
Five minutes after the audio source is stopped, it will start fading
in again and the beep sound will resume.
• Buttons on the unit other than the
snooze button.
Press ALARM or
.
• You can also stop the alarm by holding down SNOOZE/SLEEP.
• If you don't stop the alarm, it will stop automatically after 60
minutes and the system will turn off.
• The alarm setting will be saved even if the alarm is turned off.
If the alarm is turned on again by pressing ALARM, the alarm
will sound with the previous alarm settings.
) will light,
) and the alarm will turn
will also function as the

Advertisement

Table of Contents
loading

Table of Contents