Chapter 13 Troubleshooting - Apacer Technology AL460 User Manual

Chapter 13 Troubleshooting

Problem
TV screen does not
display normally.
No power.
(All LEDs are off)
Can't operate with
the remote control.
Some folders are
not listed in files
manager windows.
Some files can't be
played back.
The SETUP MENU
appears to be in an
unrecognizable
language.
No image.
28
Possible Cause
◎ Video setting is not correct.
◎ The power plug is not properly
connected.
◎ If this device cannot be
activated by pressing
button of remote control, it is
probably because the power is
off.
◎ Remote control is not pointing
toward the remote receiver.
◎ Battery is not assembled
properly.
◎ Battery became depleted.
◎ These folders may be
"Hidden", "Encrypted",
"Compressed" or "System
Folder".
◎ These files are compressed
by Windows.
◎ The formats of these files are
not supported.
◎ These files are damaged.
◎ Incorrect Menu LANGUAGE
setting.
◎ Video cable is not connected.
◎ Incorrect video setting.
Solution
◎ Press the TV SYSTEM button to
switch output TV system.
◎ Check the power connection
and plug it again.
◎ Refer to "Power Connection"
section for its solution.
◎ Point the remote control toward
the receiver when in operation.
◎ Check the battery direction.
◎ Replace the battery.
◎ Change the attribute of these
folders, or create another folder.
◎ Uncompress them.
◎ Convert these files to the
supported format.
◎ Replace them with undamaged
ones.
◎ Check the Menu LANGUAGE
setting in SETUP MENU.
◎ Check video connection.
◎ Press the TV SYSTEM button to
switch output TV system.