Digital Output; Video Setup; Aspect Ratio - Apacer Technology AL460 User Manual

Digital Output

1. Press
2. Press
or HDMI LPCM to enable or disable the function.
3. Press
HDMI LPCM:
HDMI RAM:

VIDEO SETUP

Press
select the Video option. Press

Aspect Ratio

Use it to select the way videos are displayed.
1. Press
2. Press
select from Pan Scan 4:3, Letter Box 4:3, or 16:9.
3. Press
Pan Scan 4:3: Display a wide picture on the entire screen and cuts off the redundant
Letter Box 4:3: Display a wide picture with two black borders on the top and bottom of 4:3
16:9:
Brightness
Select to set brightness levels.
1. Press
2. Press
3. Press
12
to enter.
or to select from HDMI RAW
to confirm or press
It is the original bit stream and will provide a better audio output quality.
It is the default setting, and provides 2 channels audio output.
or on the remote control to
to enter.
and on the remote control to
to confirm or press
portions. Select when a standard 4:3 TV is connected.
screen. Select when a standard 4:3 TV is connected.
Compress the image to convert the whole image. Select when a 16:9 TV is
connected.
to enter.
or to adjust brightness. The new setting is previewed on screen.
to confirm or press
to exit.
to enter.
to exit.
to exit.