Kenmore 110.2963 Series Quick Start Manual page 6

OPTIONS
This is the rinse at the end of each cycle.
One Rinse
CYCLE SELECTOR (TIMER) CONTROL
Heavy Duty
Use this cycle for cottons and linens used regularly. For
maximum soil removal, you should set the Cycle Selector
(Timer) Control for the longest available time.
Normal / Casual
Select this cycle for synthetic fabrics such as dress shirts,
blouses, and slacks. The cycle will give you a load-cooling
spray rinse to reduce wrinkling.
Delicate
This cycle combines slow-speed agitation and slow-speed
spin to gently clean garments while reducing wrinkles.
Handwash
Use this cycle for special care items. This cycle features
a series of brief agitations and short soaks for gentle
cleaning and for minimal wrinkling.
Before you call service...check for the following.
TROUBLESHOOTING – SOUNDS and LEAKS
Loud clicking and banging?
• The yellow shipping strap may still be in the rear of the
washer. Completely remove the yellow shipping strap.
• The washer should be level, and the feet should be firmly
on the floor.
Some sounds are normal but may be different from
those of your previous washer.
• The gears engaging after the drain and before the spin.
• The sound of air being pulled through the pump after most
of the water has drained.
© 2008 Sears Brands, LLC.
W10026673A
Choose this option for an automatic 2nd rinse cycle.
2nd Rinse
2nd Rinse
A second rinse can be used to aid in improved removal of
detergent or bleach residue from garments. This option may
be automatically added to the wash cycle by setting the
OPTIONS Control to 2nd Rinse anytime before the end
of the cycle.
Rinse & Spin
Select this option if you think an extra rinse is needed. Set
OPTIONS Control (if available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (if available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.
Is the washer leaking?
• Fill hose connections are tight
• Gaskets in fill hose are tight and flat
• Drain hose clamp is securely attached
• Faucets, drain/standpipe, or laundry tub is not leaking
• The washer tub is centered, and the load evenly balanced
at the start of each load
• The washer is level
• The front feet are installed, and the nuts are tightened
to the cabinet
See the Use and Care Guide for complete details.
Registered Trademark / Trademark /
® TM
Sears Brands, LLC, used under licensee by Sears Canada Inc.
Service Mark of
SM
7/08
Printed in U.S.A