VIEWING THE EMBROIDERING SCREEN
■ Key Functions
Using these keys, you can change the size of the pattern, rotate the pattern, etc.
Starting point key
Multi color key
Embroidery LED foot
Function page key
Press an arrow key to move the pattern in the direction shown by the arrow.
(Press the Center key to return the pattern to the center of the embroidery
Press this key to rotate the pattern. You can rotate a pattern one degree, 10
degrees or 90 degrees at a time.
Press this key to change the size of the pattern.
Press this key to embroider the selected pattern with a single color.
Press this key to return to the pattern type selection screen.
Press this key to specify automatic thread cutting, thread trimming or the
thread tension. For embroidery, these functions are set automatically.
Press this key to move the needle forward or back in the pattern; useful if the
thread breaks while sewing or if you want to start again from the beginning.
Press this key to check the position of the pattern. The embroidery frame
moves to the desired position so you can check that there is enough space to
sew the pattern.
Press this key to move the needle start position to align the needle with the
Press this key to save a pattern in the machine's memory, USB media or a
Press this key to change the density of alphabet character or frame patterns.
Press this key to change the color of each letter when sewing alphabet
Press this key to turn on the LED pointer.
Press this key to create a horizontal mirror image of the pattern.
Press this key to show all the keys in this screen.
Press this key for a preview of the sewn image.
• Some operations or functions are not
available for certain patterns. If the key
display is light gray, you cannot use that
function or operation with the selected