Stitch Setting Chart - Brother 882-C50 Operational Manual

STITCH SETTING CHART

The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch
widths, and whether or not the twin needle mode can be used.
Presser foot
Stitch Stitch name
Straight stitch
(Left)
Straight stitch
(Left)
Straight stitch
(Middle)
Straight stitch
(Middle)
Triple stretch
stitch
Stem stitch
Decorative
stitch
Basting stitch
Zigzag stitch
Zigzag stitch
Zigzag stitch
(Right)
Zigzag stitch
(Left)
2 steps elastic
zigzag
3 steps elastic
zigzag
Overcasting
stitch
Applications
General sewing, gather,
pintuck, etc.
General sewing, gather,
pintuck, etc.
General sewing, gather,
pintuck, etc.
General sewing, gather,
pintuck, etc.
General sewing for
reinforcement and decorative
topstitching
Reinforced stitching, sewing
and decorative applications
Decorative stitching, top
stitching
Basting
For overcasting, mending.
For overcasting, mending.
Start from right needle
position, zigzag sew at left.
Start from left needle position,
zigzag sew at right.
Overcasting (medium weight
and stretch fabrics), tape and
elastic
Overcasting (medium,
heavyweight and stretch
fabrics), tape and elastic
Reinforcing of light and
medium weight fabrics

STITCH SETTING CHART

Stitch width Stitch length
[mm (inch)] [mm (inch)]
Auto. Manual Auto.
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
1.0 0.0 - 7.0 2.5
(1/16) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 20
(0) (0 - 1/4) (3/4)
3.5 0.0 - 7.0 1.4
(1/8) (0 - 1/4) (1/16)
3.5 0.0 - 7.0 1.4
(1/8) (0 - 1/4) (1/16)
3.5 2.5 - 5.0 1.4
(1/8) (3/32 - 3/16) (1/16)
3.5 2.5 - 5.0 1.4
(1/8) (3/32 - 3/16) (1/16)
5.0 0.0 - 7.0 1.0
(3/16) (0 - 1/4) (1/16)
5.0 0.0 - 7.0 1.0
(3/16) (0 - 1/4) (1/16)
3.5 2.5 - 5.0 2.0
(1/8) (3/32 - 3/16) (1/16)
Twin
needle
Manual
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.4 - 5.0 OK
(1/64 - 3/16) ( J )
0.4 - 5.0 OK
(1/64 - 3/16) ( J )
0.4 - 5.0 OK
(1/64 - 3/16) ( J )
5 - 30
(3/16 - NO
1-3/16)
0.0 - 5.0 OK
(0 - 3/16) ( J )
0.0 - 5.0 OK
(0 - 3/16) ( J )
0.3 - 5.0 OK
(1/64 - 3/16) ( J )
0.3 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.4 - 5.0
NO
(1/64 - 3/16)
Sewing S-67