Download  Print this page

If The Needle Catches Too Much Of The Hem Fold; If The Needle Does Not Catch The Hem Fold - Brother 882-C50 Operational Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise the
needle, and then change the stitch width.
<Stitch width>
a Thick fabric
b Normal fabric
Memo
• Blind hem stitches cannot be sewn if the left
needle drop point does not catch the fold. If
the needle catches too much of the fold, the
fabric cannot be unfolded and the seam
appearing on the right side of the fabric will
be very large, leaving an unattractive finish.
If you experience either of these cases,
follow the instructions below to solve the
problem.
■ If the Needle Catches Too Much of
the Hem Fold
The needle is too far to the left.
Press
to decrease the stitch width so that the
needle slightly catches the fold of the hem.
<Thick fabric>
<Normal fabric>
1
a Wrong side of fabric
b Right side of fabric
■ If the Needle does not Catch the
Hem Fold
The needle is too far to the right.
Press
to increase the stitch width so that the
needle slightly catches the fold of the hem.
<Thick fabric>
SEWING THE STITCHES
2
Sewing S-47
S
2

Advertisement

Table of Contents

   Related Manuals for Brother 882-C50

Comments to this Manuals

Symbols: 0
Latest comments: