Osd Menu Functions; Adjusting The Brightness And Contrast - Fujitsu B19W-5 ECO Operating Manual

Operation
If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.

OSD menu functions

The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed because
of the digital transmission technology being used.

Adjusting the brightness and contrast

Brightness
Contrast
Black level
Auto level *
* function not available in DVI mode
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
18
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you can change the brightness of the background lighting.
You can see whether the ECO operating mode is active under the bar for
displaying the brightness setting.
Set the contrast of the display
With this function you can modify the contrast of pale colours.
Set the brightness of the display
With this function you modify the contrast of dark colours.
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the button.
SELECT / MENU
A26361-K1333-Z220-1-7619, edition 1