During A Call - Kenwood KDC-X896 Quick Start Manual

General operation
Auxiliary input display setting
You can set the display when switched the AUX
source.
1
Select the AUX source
Press the [SRC] button.
Select the "AUX" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the AUX name set item
Select the following items using the Control
knob.
"Settings" "AUX Name Set"
4
Select the display connected as an AUX source
and determine it
Turn the Control knob to select the Auxiliary
input display, and then press the Control knob.
Select "AUX", "DVD", "PORTABLE", "GAME", "VIDEO", or
"TV".
5
Exit the Function setting mode
Press and hold the [ ] button.
34
|
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
Function of KDC-X496, KDC-452U, KMR-550U
Muting the audio upon reception of a
phone call
The audio system automatically mutes when it
receives an incoming call.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting wires to terminals> (page
12) in Quick start guide.
Initial settings
You can configure initial settings of this unit.
1
Select the Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Initial settings item
Turn the Control knob to select "Initial Settings",
and then press the Control knob.
4
Select a desired Initial setting item
Turn the Control knob to select an Initial setting
item, and then press the Control knob.
Display Description
"Initial Settings"
"SRC Select" Select "2" to change the source selection
method. Press the [SRC] button, turn the
Control knob to select the source, and then
press the Control knob to determine it.
1 / 2
"Key Beep" Setting the operation check sound (beep
sound) ON/OFF.
"ON" / "OFF"
"Function Language" Changes the display language of items
displayed in the Function setting mode.
"English" / "Français" / "Español"
"Built-in AUX" Sets whether to display AUX during source
selection.
"ON" / "OFF"
"CD Read" Sets the method for reading CD.
When unable to play a special format CD, set
this setting to "2" to force playing. Note that
some music CDs may be unplayable even
when set to "2".
In addition, audio files cannot be played when
set to "2". Normally, keep this set to "1".
1: Automatically distinguishes between the
audio file disc and music CD when playing
a disc.
2: Forces playing as a music CD.
"Built-in AMP" Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"ON" / "OFF"
"Speaker Select" Sets the speaker type so that the System Q
value is optimal.
"OFF": OFF
"5/4inch": For 5 & 4 in. speaker
"6x9/6inch": For 6 & 6x9 in. speaker
"O.E.M.": For the OEM speaker
Contents
"F/W Update" Upgrades the firmware.
Selecting "YES" and then pressing the Control
knob starts upgrading the firmware.
For how to update the firmware, access our
web site.
http://www.kenwood.com/cs/ce/
( : Factory setting)
5
Select an Initial setting and determine it
Turn the Control knob to select desired setting,
and then press the Control knob.
The previous item is displayed.
6
Exit the Function setting mode
Press and hold the [ ] button.
|
English
35