Installing The Enclosure Cover; Routine Maintenance - Honeywell HD4VC4HR User Manual

Installing the Enclosure Cover

To install the enclosure cover, use the Allen key (supplied) to secure the HD4VC4HR dome
enclosure to the base with four #8-32 security screws.
Figure 7 Enclosure Cover Installation
#8-32 security
screws (x4)

Routine Maintenance

Use regular liquid cleaners to remove dirt and grime from the HD4VC4HR dome.
Caution Do not use harsh or abrasive cleaners which can scratch the
polycarbonate dome and reduce visibility for the camera.
If the camera view is obstructed by scratches, remove the front plate and rotate to find an
unscratched part of the dome.
Rev 1.02
HD4VC4HR dome
enclosure
10 Document 900.0556
01/06