Page 1 Dakota 2 0 1 1 O W N E R ’ S M A N U A L...
Page 2 With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc. used in substitution tional on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5 INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Replacement Keys ..... 17 A Word About Your Keys ....12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Lock The Doors ....21 ▫ Auto-Down — Driver’s Side Only ..33 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Enhanced Seat Belt Use Reminder System ▫ Child Restraints ..... . 62 (BeltAlert ) .
Page 14: Things To Know Before Starting Your Vehicle
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your vehicle has the Automatic Transmission key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized 1.
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 key to the right slightly, then remove the key as de- scribed. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual Transmission — If Equipped When the steering wheel is in the LOCK position, the steering and ignition systems are locked to provide antitheft protection for your vehicle.
Page 17: Steering Wheel Lock - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 rearward. To unlock the driver’s door, turn the key To Release the Steering Wheel Lock forward. For external door lock lubrication, refer to Insert the key in the ignition switch and start the engine. “Maintenance Procedures”...
Page 18 16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system uses ignition keys that have an embedded If the Vehicle Security Light turns on during normal electronic chip (transponder) to prevent unauthorized vehicle operation (vehicle running for longer than 10 sec- vehicle operation.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Replacement Keys procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one NOTE: Only keys that are programmed to the vehicle that has never been programmed. electronics can be used to start and operate the vehicle.
Page 20: Vehicle Security Alarm - If Equipped
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Repeat this procedure to program up to eight keys. If you Turn the ignition switch to the ON/RUN position within do not have a programmed Sentry Key , contact your 15 seconds.
Page 21: To Arm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Arm The System The Vehicle Security Alarm will also disarm if the vehicle The Vehicle Security Alarm will set when you use the Sentry Key in inserted into the ignition and turned to power door locks, or use the Remote Keyless Entry (RKE) ON/RUN.
Page 22: Illuminated Entry
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ILLUMINATED ENTRY REMOTE KEYLESS ENTRY (RKE) This system allows you to lock or unlock the doors or Vehicles Equipped With Power Door Locks activate the Panic Alarm from distances up to approxi- All interior lights will illuminate in the vehicle when the mately 66 ft (20 m) using a Remote Keyless Entry (RKE) doors are unlocked using the Remote Keyless Entry...
Page 23: To Unlock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: The line of transmission must not be blocked 3. Release both buttons at the same time. with metal objects. 4. Test the feature while outside of the vehicle by press- To Unlock The Doors ing the LOCK/UNLOCK button on the RKE transmitter.
Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Horn Chirp Programming NOTE: Pressing the LOCK button on the RKE transmit- The horn chirp feature is shipped from the assembly ter while you are inside the vehicle will activate the plant activated. If desired, this feature can be disabled by Vehicle Security Alarm.
Page 25: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 4. Test the Flash Lamps With Lock feature while outside To cancel the Panic mode, press and release the PANIC of the vehicle by pressing the LOCK button on the RKE button on the RKE transmitter a second time. Panic mode transmitter with the ignition in the OFF position and the will automatically cancel after three minutes, or if the key removed.
Page 26: Programming Additional Transmitters
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly ap- NOTE: Perchlorate Material – special handling may proved by the party responsible for compliance could apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate void the user’s authority to operate the equipment. 1.
Page 27: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 2. Remove and replace the battery. When replacing the NOTE: The vehicle must be equipped with an auto- battery, match the + sign on battery to the + sign on the matic transmission to be equipped with Remote Start. inside of the battery clip, located on the back cover.
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • The park lamps will turn on and remain on during • Do not start or run an engine in a closed garage or Remote Start mode. • For security, power window and power sunroof op- confined area.
Page 29: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 To Exit Remote Start Mode Without Driving The DOOR LOCKS Vehicle Manual Door Locks Press and release the REMOTE START button one time, All the doors can be manually locked from the inside by or allow the engine to run for the entire 15-minute cycle.
Page 30: Power Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive, as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For vehicles equipped with the Electronic Vehicle Automatic Door Locks — If Equipped The doors will lock automatically if all of the following Information Center (EVIC), refer to “Electronic Vehicle conditions are met: Information Center (EVIC) —...
Page 32 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Repeat these steps if you want to return this feature to 1. Enter your vehicle and close all the doors. its previous setting. 2. Fasten your seat belt. (Fastening the seat belt will cancel any chiming that may be confusing during this NOTE: •...
Page 33: Child-Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Child-Protection Door Lock To use the system, open each rear door, slide the lever up To provide a safer environment for children riding in the to engage the locks, and down to disengage the child- rear seat, the rear doors of your vehicle have the child- protection locks.
Page 34: Windows
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS WARNING! Power Windows Avoid trapping anyone in a vehicle in a collision. The control on the left front door has up-down switches Remember that the rear doors can only be opened that give you finger-tip control of all the power windows.
Page 35: Auto-Down - Driver's Side Only
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition.
Page 36: Wind Buffeting
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout button. To enable the window controls, windows down or partially open. This is a normal press the Window Lockout button a second time. occurrence and can be minimized. If the rear windows are open and buffeting occurs, open the front and rear windows together to minimize the buffeting.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • Knee bolsters for front seat occupants NOTE: The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different • Front seat belts incorporate pretensioners that may rates of inflation based on the severity and type of enhance occupant protection by managing occupant collision.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE secured in the rear seat in child restraints or belt- 4. Do not lean against the door or window. If your positioning booster seats. Older children who do not use vehicle has side airbags, and deployment occurs, the child restraints or belt-positioning booster seats should side airbags will inflate forcefully into the space be- ride properly buckled up in the rear seat.
Page 39: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Buckle up even though you are an excellent driver, even WARNING! (Continued) on short trips. Someone on the road may be a poor driver • Being too close to the steering wheel or instrument and cause an accident that includes you.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE you under normal conditions. However, in an accident webbing to retract. As the belt retracts, you will hear a the belt will lock and reduce the risk of you striking the clicking sound. This indicates the safety belt is now in the inside of the vehicle or being thrown out.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • Two people should never be belted into a single vehicle that is not equipped with seats and seat seat belt.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around 1. Enter the vehicle and close the door. Sit back and your lap.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 WARNING! WARNING! (Continued) • A belt that is worn under your arm is dangerous. • A belt buckled into the wrong buckle will not Your body could strike the inside surfaces of the protect you properly.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tilt the latch plate and pull on the lap belt. A snug belt WARNING! reduces the risk of sliding under the belt in an accident. • A lap belt worn too high can increase the risk of internal injury in an accident.
Page 45: Adjustable Upper Shoulder Belt Anchorage
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 6. To release the belt, push the red button on the buckle. position the belt away from your neck. Press the release The belt will automatically retract to its stowed position. button to release the anchorage, and then move it up or If necessary, slide the latch plate down the webbing to down to the position that fits you best.
Page 46: Center Lap Belts
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
Page 47: Lap/Shoulder Belt Untwisting Procedure
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 3. Slide the latch plate upward over the folded webbing. WARNING! The folded webbing must enter the slot at the top of the • A lap belt worn too loose or too high is dangerous. latch plate.
Page 48: Automatic Locking Retractor Mode (Alr) - If Equipped
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an position that has a belt with this feature. Children ALR and is being used for normal usage: 12 years old and under should always be properly restrained in the rear seat.
Page 49: Seat Belt Pretensioners
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 NOTE: These devices are not a substitute for proper seat WARNING! belt placement by the occupant. The seat belt still must be • The belt and retractor assembly must be replaced worn snugly and positioned properly. if the seat belt assembly Automatic Locking Re- The pretensioners are triggered by the Occupant Re- tractor (ALR) feature or any other seat belt func-...
Page 50: Enhanced Seat Belt Use Reminder System (Beltalert )
(BeltAlert ) BeltAlert Programming BeltAlert is a feature intended to remind the driver to Chrysler Group LLC does not recommend deactivating fasten their seatbelt. This feature is active whenever the the BeltAlert . ignition is on. If the driver is unbelted, the Seat Belt...
Page 51: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: The following steps must occur within the first NOTE: Watch the Seat Belt reminder Light to turn on 60 seconds of the ignition switch being turned to the while the seat belt retracts and turn off while re-buckling ON/RUN or START position.
Page 52: Seat Belt Extender
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender belt restraint systems. The driver’s Advanced Front Air- If a seat belt is too short, even when fully extended, your bag is mounted in the center of the steering wheel. The authorized dealer can provide you with a seat belt passenger’s Advanced Front Airbag is mounted in the extender.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: These airbags are certified to the new Federal driver, front, and rear passengers sitting next to a win- regulations for Advanced Airbags. dow. If the vehicle is equipped with SABIC airbags, they are located above the side windows and their covers are The Advanced Front Airbags have a multistage inflator also labeled: SRS AIRBAG.
Page 54: Advanced Front Airbag Features
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolster The first stage inflator is triggered immediately during an impact that requires airbag deployment. This low output • Driver Advanced Front Airbag is used in less severe collisions. A higher energy output is •...
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! (Continued) WARNING! (Continued) • Do not put anything on or around the airbag • Do not have any accessory items installed which covers or attempt to open them manually. You may will alter the roof, including adding a sunroof to damage the airbags and you could be injured your vehicle.
Page 56: Airbag Deployment Sensors And Controls
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Airbag covers may not be obvious in the interior Knee Impact Bolsters trim, but they will open during airbag deployment. The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position front occu- The system includes side impact sensors that are cali- pants for the best interaction with the Advanced Front brated to deploy the side airbags during impacts that...
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 ORC deploys the Advanced Front Airbags, SABIC air- The side airbags will not deploy in all side collisions. Side bags — if equipped, and front seat belt pretensioners, as airbag deployment will depend on the severity and type required, depending on the severity and type of impact.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC contains a backup power supply system that WARNING! may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Ignoring the Airbag Warning Light in your instru- ment panel could mean you won’t have the airbags to Also, the ORC turns on the Airbag Warning protect you in a collision.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 based on the collision type and severity. The steering A quantity of non-toxic gas is generated to inflate the wheel hub trim cover and the upper right side of the SABIC. The inflating SABIC pushes the outside edge of instrument panel separate and fold out of the way as the the headliner out of the way and covers the window.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System NOTE: Front and/or side airbags will not deploy in all In the event of an impact causing airbag deployment, if collisions. This does not mean something is wrong with the communication network remains intact, and the the airbag system.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 airbag inflation. These airborne particles may irritate Maintaining Your Airbag System the skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with airbag system electrical components. While the WARNING! (Continued) airbag system is designed to be maintenance free. If any • Do not attempt to modify any part of your airbag of the following occurs, have an authorized dealer ser- system.
Page 63: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • How far (if at all) the driver was depressing the located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the accelerator and/or brake pedal; and, fuse is good.
Page 64: Child Restraints
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is WARNING! required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, In a collision, an unrestrained child, even a tiny baby, such as law enforcement, that have the special equip- can become a projectile inside the vehicle.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Infants And Child Restraints restraint anchorage system. (Refer to “LATCH - Child Seat Anchorage System (Lower Anchors and Tether for • Safety experts recommend that children ride CHildren”.) rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg).
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Make sure that the child is upright in the seat. in the vehicle by the seat belt or the LATCH child restraint anchorage system. (Refer to “LATCH - Child • The lap portion should be low on the hips and as snug Seat Anchorage System (Lower Anchors and Tether for as possible.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Standards. The manufacturer recommends that you WARNING! try a child restraint in the vehicle seats where you will • Improper installation can lead to failure of an use it before you buy it. infant or child restraint.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Buckle the child into the restraint exactly as the from the child restraint to the vehicle structure. LATCH- manufacturer’s instructions tell you. compatible child restraint systems are now available. However, because the lower anchorages are to be intro- WARNING! duced over a period of years, child restraint systems having attachments for those anchorages will continue to...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Extended Cab Crew Cab • The Extended Cab right rear (if equipped with a rear • The Crew Cab second row seat has lower anchorages seat) passenger seating position has lower anchorages that capable accommodating...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your child restraints are not LATCH-compatible, Installing The LATCH-Compatible Child Restraint you can only install the child restraints using the System — if equipped vehicle’s seat belts. Refer to “Installing The LATCH- We urge you to carefully follow the directions of the Compatible Child Restraint System”.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 strap. Forward-facing toddler restraints, and some rear- downward into the seat, removing slack in the straps facing infant restraints, will also be equipped with a according to the child restraint manufacturer’s instruc- tether strap, a hook for attachment to the tether strap tions.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Belts In Passenger Seating Positions” section. The chart WARNING! below defines the seating positions with an Automatic Locking Retractor (ALR) or a cinching latch plate. Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or Driver Center...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 In the rear seat, you may have trouble tightening the two seating positions. When there is a rear seat delete lap/shoulder belt on the child restraint because the option, the tether anchorage located on the cab back buckle or latch plate is too close to the belt path opening panel is designed to be used for the front seat center on the restraint.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be seriously injured or killed. Make sure the child restraint tether strap is always routed through the proper anchor strap inner loop.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Tether Straps at the Rear Passenger Seat (Crew Cab) 1. Route the child restraint tether strap under the head restraint for the outboard seating positions, and then through the anchor strap outer loop (webbing material loop), located directly behind the child restraint.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Two anchors must be used for any of the three WARNING! seating positions. An incorrectly anchored tether strap could lead to seat failure and injury to the child. In a collision, the seat could come loose and allow the child to crash into the inside of the vehicle or other passengers, or even be thrown from the vehicle.
Page 77: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 ENGINE BREAK-IN RECOMMENDATIONS A new engine may consume some oil during its first few A long break-in period is not required for the engine and thousand miles (kilometers) of operation. This should be drivetrain (transmission and axle) in your vehicle.
Page 78: Exhaust Gas
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • It is extremely dangerous to ride in a cargo area, WARNING! inside or outside of a vehicle. In a collision, people Exhaust gases can injure or kill. They contain carbon riding in these areas are more likely to be seri- monoxide (CO), which is colorless and odorless.
Page 79: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place • Always make sure that floor mats are properly the blower control on high speed. You should be able to attached to the floor mat fasteners.
Page 81: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 lodged in the tread. Inspect the tread and sidewall for WARNING! (Continued) cuts and cracks. Check the wheel nuts for tightness. • Always make sure that objects cannot fall into the Check the tires (including spare) for proper pressure. driver footwell while the vehicle is moving.
Page 83: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Phone Call Features ....98 Mirrors ......85 ▫...
Page 84 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Voice Training ..... . 124 ▫ Headlight Delay ..... 135 ▫...
Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 ▫ To Activate ......145 ▫ Distance To Empty (DTE) ....150 ▫...
Page 86 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Using HomeLink ▫ Rear Cargo Area Utility Rails — ....158 If Equipped ......168 ▫...
Page 87: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. The mirror should be adjusted to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 88: Outside Mirrors
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to the left of the button will illuminate to indicate when CAUTION! the dimming feature is activated. The sensor to the right of the button does not illuminate. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
Page 89: Outside Mirrors Folding Feature - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 90: Uconnect™ Phone - If Equipped
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 NOTE: The Uconnect™ Phone requires a mobile phone Uconnect™ features Bluetooth technology - the global equipped with the Bluetooth “Hands-Free Profile”, Ver- standard that enables different electronic devices to con- sion 0.96 or higher. See the Uconnect™ website for nect to each other without wires or a docking station, so supported phones.
Page 92: Operation
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Button The Uconnect™ Phone is fully integrated with the vehi- The radio or steering wheel controls (if cle’s audio system. The volume of the Uconnect™ Phone equipped) will contain the two control buttons can be adjusted either from the radio volume control (Uconnect™...
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 • For certain operations, compound commands can be Help Command used. For example, instead of saying “Setup” and then If you need assistance at any prompt, or if you want to “Phone Pairing”, the following compound command know your options at any prompt, say “Help”...
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For identification purposes, you will be prompted to To complete the pairing process, you will need to refer- ence your mobile phone Owner’s Manual. The give the Uconnect™ Phone a name for your mobile Uconnect™...
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 • The system will prompt you to say the name of the Dial By Saying A Number person you want to call. • Press the button to begin. • After the “Ready” prompt and the following beep, say •...
Page 96 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say The Uconnect™ Phone will allow you to enter up to 32 “Phonebook New Entry”. names in the phonebook with each name having up to four associated phone numbers and designations.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 • Automatic download and update, if supported, begins • This downloaded phonebook cannot be edited or as soon as the Bluetooth wireless phone connection is deleted on the Uconnect™ Phone. These can only be made to the Uconnect™...
Page 98 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Edit Uconnect™ Phonebook Entries • The phone handset must support Bluetooth OBEX NOTE: transfers of phonebook entries to use this feature. • Editing names in the phonebook is recommended • Some phones cannot send phonebook entries if they when the vehicle is not in motion.
Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
Page 100: Phone Call Features
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say Delete/Erase “All” Uconnect™ Phonebook Entries “Phonebook List Names”. • Press the button to begin. • The Uconnect™ Phone will play the names of all the •...
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 mobile service plan. For example, if your mobile service call waiting that you normally hear when using your plan provides three-way calling, this feature can be mobile phone. Press the button to place the current accessed through the Uconnect™...
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold Three-Way Calling To put a call on hold, press the button until you hear To initiate three-way calling, press the button a single beep. This indicates that the call is on hold. To while a call is in progress, and make a second phone call, bring the call back from hold, press and hold the as described under “Making a Second Call While Current...
Page 103: Uconnect™ Phone Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain dura- tion, after which the call is automatically transferred •...
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the Ready prompt and the following beep, say After selecting one of the languages, all prompts and voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency num- NOTE: After every Uconnect™...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Mexico City in Mexico). Please refer to the 24-Hour WARNING! “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour To use your Uconnect™ Phone System in an emer- Towing Assistance references.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Working With Automated Systems is also to be used for navigating through an automated This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Barge In — Overriding Prompts Phone And Network Status Indicators The “Voice Command” button can be used when you If available on the radio and/or on a premium display wish to skip part of a prompt and issue your voice such as the instrument panel cluster, and supported by command immediately.
Page 108: Advanced Phone Connectivity
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Certain brands of mobile phones do not send the Advanced Phone Connectivity dial ring to the Uconnect™ Phone to play it on the vehicle Transfer Call To And From Mobile Phone audio system, so you will not hear it. Under this situa- The Uconnect™...
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • After the “Ready” prompt and the following beep, say List Paired Mobile Phone Names “Setup Select Phone” and follow the prompts. • Press the button to begin. • You can also press the button at any time while •...
Page 110: Things You Should Know About Your Uconnect™ Phone
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can also press the • Press the button at any time while button and say the “Voice Training, the list is being played, and then choose the phone you System Training, or Start Voice Training” command. wish to delete.
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • low-to-medium vehicle speed, This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will • low road noise, prompt you before resetting to factory settings. •...
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect™ Phone Lo- • low road noise, cal) name recognition rate is optimized when the • smooth road surface, entries are not similar. • fully closed windows, • Numbers must be spoken in single digits. “800” must •...
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Recent Calls After reading a message, you can “Reply” or “Forward” If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone. load”, Uconnect™ Phone can list your Outgoing, Incom- Send Messages: ing and Missed Calls.
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 14. Are you there yet? 1. Yes 15. Where are we meeting? 2. No 16. Can this wait? 3. Where are you? 17. Bye for now 4. I need more direction. 18.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Bluetooth Communication Link Power-Up Mobile phones have been found to lose connection to the After switching the ignition key from OFF to either the Uconnect™ Phone. When this happens, the connection ON or ACC position, or after a language change, you can generally be reestablished by switching the phone must wait at least fifteen seconds prior to using the off/on.
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 121: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 122: Commands
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options.
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • “Memo” (to switch to the memo recorder) Changing the Volume • “System Setup” (to switch to system setup) 1. Start a dialogue by pressing the Voice Command button. Radio AM (or Radio Long Wave or Radio Medium Wave —...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Next Station” (to select the next station) • “Select Name” (to say the name of a channel) • “Previous Station” (to select the previous station) • “Menu Radio” (to switch to the radio menu) •...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Memo − “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo”. In − “Delete” (to delete a memo) this mode, you may say the following commands: • “Delete All” (to delete all memos) •...
Page 126: Voice Training
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Tutorial” switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only. • “Voice Training” SEATS NOTE: Keep in mind that you have to press the Voice Seats are a part of the Occupant Restraint System of the Command button first and wait for the beep...
Page 127: Power Driver Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Power Driver Seat Adjusting The Seat Forward Or Rearward On some models the driver’s seat can be equipped with The seat can be adjusted both forward and rearward. six-way power. The power seat controls are located on Push the four-way switch seat switch forward or rear- the outboard side of the driver’s seat cushion.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the four-way seat switch, the seat will move in the direction of the switch. Release the switch when you have reached the desired position.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 130: Manual Seat Adjustment
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Adjustment While sitting in the seat, lift up on the bar and move the For models equipped with manual seats, the driver and seat forward or rearward. Release the bar once you have passenger seats can be adjusted forward or rearward by reached the desired position.
Page 131: Front Seat - Manual Recliner
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Front Seat — Manual Recliner WARNING! To recline the seatback, lift the recline lever, located on the outboard side of the seat, lean back and release the Do not ride with the seatback reclined so that the lever when you reach the desired position.
Page 132: Manual Lumbar - If Equipped
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar — If Equipped Heated Seats — If Equipped Some vehicle may be equipped with a manual lumbar On some models, the front driver and passenger seats support. The manual lumbar rotary control adjustment is may be equipped with heaters in both the seat cushions located on the left side of the driver’s seat.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 When the HIGH-level setting is selected, the heater will WARNING! provide a boosted heat level during the first four minutes • Persons who are unable to feel pain to the skin of operation. Then, the heat output will drop to the normal HIGH-level.
Page 134: Head Restraints
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Head Restraints CAUTION! To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the adjust- Repeated overheating of the seat could damage the ment button, located on the base of the head restraint, heating element and/or degrade the material of the seat.
Page 135: Extended Cab/Crew Cab Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Rear Head Restraints TO OPEN AND CLOSE THE HOOD The rear seat is equipped with nonadjustable head re- To open the hood, two latches must be released. straints. Refer to “Occupant Restraints” in “Things T o 1.
Page 136: Lights
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Then push the safety latch lever up while lifting the CAUTION! grille with your hand. It is located at the bottom center of the grille. To prevent possible damage, do not slam the hood to close it.
Page 137: Headlights, Parking Lights And Panel Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Your vehicle is equipped with plastic headlight lenses that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth.
Page 138: Lights-On Reminder
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE on for 60 seconds. Headlight delay can be cancelled by Fog Lights — If Equipped either turning the headlight switch on then off, or by The Fog Lights are turned on by placing the turning the ignition ON.
Page 139: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 down to the OFF detent will cause all the interior lights to go out. This is also known as the Party mode because it allows the doors to stay open for extended periods of time without discharging the vehicle’s battery.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: • If either light remains on and does not flash, or there is Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show a very fast flash rate, check for a defective outside light proper operation of the front and rear turn signal lights.
Page 141: Battery Saver
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 High/Low Beam Switch Battery Saver Pull the multifunction lever fully toward the steering To protect the life of your vehicle’s battery, Load Shed- wheel to switch the headlights from high or low beam. ding is provided for both the interior and exterior lights.
Page 142: Cargo Light - If Equipped
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light — If Equipped WINDSHIELD WIPERS AND WASHERS The cargo lights are turned on by pressing on cargo The multifunction lever is located on the left side of the button. The cargo lights will also turn on for 30 seconds steering column.
Page 143: Windshield Wipers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Windshield Wipers Intermittent Wiper System The wipers and washers are operated by a switch in the The intermittent feature of this system was designed for multifunction lever. Turn the end of the multifunction use when weather conditions make a single wiping cycle, lever to select the desired wiper speed.
Page 144: Windshield Washers
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers To use the washer, push in on the washer knob on the end of the multifunction lever and hold while spray is desired. If the washer knob is depressed while in the delay range, the wiper will operate for several seconds after the washer knob is released.
Page 145: Tilt Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use.
Page 146: Electronic Speed Control - If Equipped
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
Page 147: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 the same time. If this occurs, the Electronic Speed Control without erasing the memory. Pushing the ON/OFF but- System can be reactivated by pushing the Electronic ton to the OFF position or turning off the ignition erases Speed Control ON/OFF button and resetting the desired the memory.
Page 148: To Vary The Speed Setting
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary The Speed Setting To Accelerate For Passing When the Electronic Speed Control System is ON, the Press the accelerator as you would normally. When the speed can be increased by pressing and holding the pedal is released, the vehicle will return to the set speed.
Page 149: Overhead Console
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
Page 150: Courtesy/Reading Lights
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Reading Lights COMPASS/TEMPERATURE MINI-TRIP COMPUTER Near the front of the console are two courtesy/reading This feature allows you to choose between a compass/ temperature display and one of four trip conditions being lights. monitored.
Page 151: Reset Button
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 RESET Button STEP Button Use the RESET button to reset the following displays: Use the STEP button to choose, or cycle through, the four trip conditions. • Average Fuel Economy • Trip Odometer •...
Page 152: Distance To Empty (Dte)
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE amount of fuel used and the distance the vehicle has point (fuel gauge pointer on the red “E” marker), there is traveled. When the fuel economy is reset, the display will reserve fuel capacity, which corresponds to approxi- momentarily blank, the history will be erased, and the mately 8% of tank volume.
Page 153: Elapsed Time (Et)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Elapsed Time (ET) This display shows the accumulated ignition ON time since the last reset. Resetting the Elapsed Time will cause the display to change to zero. C/T Button Use the C/T (Compass/Temperature) button to select a readout of the outside temperature and one of eight compass headings that indicate the direction in which the vehicle is facing.
Page 154: Global Reset
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Global Reset Automatic Compass Calibration If the RESET button is pressed twice within two seconds This compass is self-calibrating which eliminates the while in any of the three resettable displays (AVG ECO, need to manually set the compass. When the vehicle is ODO, ET), the GLOBAL RESET will reset all three new, the compass may appear erratic and the CAL displays.
Page 155: To Put Into A Calibration Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 If the compass appears erratic and the CAL symbol does not appear, you must manually put the compass into the “Calibration” mode. To Put Into A Calibration Mode Turn the ignition ON and set the display to “Compass/ Temperature.”...
Page 156: Outside Temperature
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Temperature Because the ambient temperature sensor is located under the hood, engine temperature can influence the displayed temperature; therefore, temperature readings are slowly updated when the vehicle speed is below 20 mph (30 km/h) or during stop-and-go driving.
Page 157: Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close The Compass Mini-Trip Computer (CMTC) illuminates while you are training the Universal Transceiver. the HomeLink symbol (a house with an arrow inside it) Do not train the transceiver if people, pets or other along with 1, 2 or 3 indicators under it, when a objects are in the path of the door or gate.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your vehicle should be parked outside of the garage If the signal is too weak to train, replace the battery in the while training. handheld transmitter. • Turn the ignition switch to the ON/RUN position. NOTE: Some gate operators and garage door openers may require you to replace Step 3 with procedures noted •...
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 This can usually be found where the hanging antenna 1. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
Page 160: Gate Operator/Canadian Programming
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming successfully accepted the frequency signal. The indica- Canadian radio-frequency laws require transmitter sig- tor(s) will change from a slow flash to a rapid flash nals to “time-out” (or quit) after several seconds of when trained.
Page 161: Security
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 1. Turn the ignition switch to the ON/RUN position. Troubleshooting Tips If you are having trouble programming HomeLink , here 2. Press and hold the desired HomeLink button for are some of the most common solutions: 20 seconds until the indicator(s) starts to flash.
Page 162: Electrical Power Outlets
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be received including interference that may cause undesired operation. NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compli- ance could void the user’s authority to operate the device.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in, draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 165: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 CUPHOLDERS A two-cavity cupholder is available on all Crew Cabs, If your vehicle has bucket seats with a center console, with rear seats mounted on the floor. there are three cupholders located on the console. Rear Cup Holders —...
Page 166: Rear Crate 'N Go Storage - If Equipped
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR CRATE ’N GO STORAGE — IF EQUIPPED To open the crates, lift upward on the crate handles and The rear Crate ’n Go storage, located under the rear seat engage the crate end flaps. lower cushion, consists of two removable, collapsible To remove the crate, press on the release lever, located on storage crates.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! Do not sit or stand on this crate. It may collapse causing serious injury. CAUTION! Do not lift up on the “End Flaps” to open the crate, damage to the “End Flaps” may occur. NOTE: The maximum loading capacity for the small crate is 30 lbs (13.6 kg) and 50 lbs (22.6 kg) for the large Insert Crate...
Page 168: Plastic Grocery Bag Retainers
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainers CONSOLE FEATURES — IF EQUIPPED Retainer hooks, which will hold plastic grocery bag Floor Console Features handles, are built into the back panel of the cab. The Floor Console between the driver’s and front pas- senger’s seat has the following features: •...
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury.
Page 170: Cargo Area Features
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Outlet And Portable Phone Storage CARGO AREA FEATURES The console is equipped with a power outlet and an Rear Cargo Area Utility Rails — If Equipped iPod/phone storage bin. The phone storage bin can be used when easy access to the phone is needed.
Page 171: Rear Window Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Utility Rail End Cap 1 — Utility Rail Detent’s 2 — Utility Rail Cleat REAR WINDOW FEATURES 3 — Cleat Retainer Nut Rear Window Defroster — If Equipped To remove the cleats from the utility rail, remove the end The rear window defroster button is located on the cap by pushing up on the locking tab, located on the right-side of the Air Conditioning and Heater...
Page 172: Sliding Rear Window - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE heated outside mirrors (if equipped). An indicator in the CAUTION! (Continued) button will illuminate when the rear window defroster is • Do not use scrapers, sharp instruments, or abra- on. The rear window defroster automatically turns off sive window cleaners on the interior surface of the after approximately 10 minutes.
Page 173: Slide-In Campers
The Manufacturer’s Warranty does not apply to body modifications and special equipment, such as a camper unit, heaters, stoves, refrigerators, etc., supplied by manufacturers other than Chrysler Group LLC. For war- ranty coverage and service on these items, contact the applicable manufacturer.
Page 174: Carbon Monoxide Warning-Vehicles Equipped With A Cap Or Slide-In Campers
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Carbon Monoxide Warning-Vehicles Equipped 4. Slide the tailgate to the passenger side while making With A Cap Or Slide-In Campers sure clearance from the box and taillight is maintained. To avoid inhaling carbon monoxide, which is deadly, the To reinstall the tailgate, do the following: exhaust system on vehicles equipped with “Cap Or Slide-In Campers”...
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 metal (or bed liner if equipped) on the inner side of the 4. Snap the tailgate support cable between the cable box in front (Club Cab only) and behind both wheel guide and the tailgate bumper. Do this on both sides of housings.
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To return the tailgate to the full-open position: CAUTION! (Continued) 1. Lift up on the tailgate. • Loading should not exceed 400 lbs (181 kg) of material suspended above the wheelhouse and 2. Remove both cables from between the cable guides partially open tailgate or vehicle damage may and the tailgate bumpers, and lower the tailgate.
Page 177: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ List Button Instrument Panel Features ....177 (Disc Mode For MP3/WMA Play) ..205 Instrument Cluster .
Page 178 176 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Notes On Playing MP3 Files ... . 217 Steering Wheel Audio Controls — If Equipped ......237 ▫...
Page 179: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 177 INSTRUMENT PANEL FEATURES 1 — Headlight Switch 6 — Glove Compartment 11 — Transfer Case Switch* 2 — Air Outlets 7 — Radio 12 — Speed Control Switches 3 — Demister Outlets 8 — Climate Controls 13 —...
Page 180: Instrument Cluster
178 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 181: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 179 INSTRUMENT CLUSTER DESCRIPTIONS 3. Turn Signal Indicators When a turn signal is activated, a right-pointing or 1. Fuel Gauge left-pointing arrow lights up and flashes to indicate The fuel gauge shows the level of fuel in the fuel tank the direction of the turn.
Page 182 180 UNDERSTANDING YOUR INSTRUMENT PANEL 5. High Beam Indicator threshold. Further overheating will cause the tempera- The high beam indicator will illuminate if the ture gauge to pass H (Hot), the indicator will continu- headlights are on high beam. ously flash and a continuous chime will occur until the engine is allowed to cool.
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 181 the charging system light remains on, it means that the WARNING! vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an autho- A hot engine cooling system is dangerous. You or rized dealer.
Page 184 182 UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, it 13. Tachometer indicates that the Anti-Lock portion of the brake system The tachometer gauge measures engine revolutions-per- is not functioning and that service is required. However, minute (RPM x 1000).
Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 183 Vehicle Odometer Messages gASCAP When the appropriate conditions exist, the following If the vehicle diagnostic system determines that the fuel messages will display in the odometer: filler cap is loose, improperly installed, or damaged, a “gASCAP”...
Page 186 184 UNDERSTANDING YOUR INSTRUMENT PANEL damaged, a “noFUSE” message will display in the odom- cluster. To reset the oil change indicator system (after eter display area. For further information on fuses and performing the scheduled maintenance), refer to the fuse locations refer to “Fuses” in “Maintaining Your following procedure: Vehicle”.
Page 187 UNDERSTANDING YOUR INSTRUMENT PANEL 185 correct mileage that the vehicle has been driven. If your light comes on, stop the vehicle and run the engine at idle odometer needs to be repaired or serviced, the repair or faster with the transmission in NEUTRAL, until the technician should leave the odometer reading the same light goes off.
Page 188 186 UNDERSTANDING YOUR INSTRUMENT PANEL 19. Electronic Throttle Control (ETC) – If Equipped 20. Brake Warning Light The Electronic Throttle Control (ETC) light This light monitors various brake functions, informs you of a problem with the ETC system. including brake fluid level and parking brake If a problem is detected, the light will come on application.
Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 187 The dual brake system provides a reserve braking capac- WARNING! ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is Driving a vehicle with the red brake light on is indicated by the Brake Warning Light which will turn on dangerous.
Page 190 188 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is If this light comes on and remains on while driving, it applied with the ignition switch in the ON/RUN posi- suggests a potential engine control problem and the need tion.
Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 189 vehicle placard or tire inflation pressure label, you should WARNING! determine the proper tire inflation pressure for those tires.) A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal As an added safety feature, your vehicle has been operating conditions.
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has tires or wheels on your vehicle, to ensure that the not reached the level to trigger illumination of the TPMS replacement or alternate tires and wheels allow the TPMS low tire pressure telltale.
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 191 23. Airbag Warning Light seconds. If the light stays on or illuminates during This light will turn on for four to eight seconds driving, it means that the 4WD system is not functioning as a bulb check when the ignition switch is first properly and that service is required.
Page 194: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
192 UNDERSTANDING YOUR INSTRUMENT PANEL 29. 4WD LOW Indicator This light alerts the driver that the vehicle is in the four-wheel drive LOW mode. The front and rear driveshafts are mechanically locked to- gether forcing the front and rear wheels to rotate at the same speed.
Page 195 UNDERSTANDING YOUR INSTRUMENT PANEL 193 Power Switch/Volume Control (Rotary) SCAN Button Push the ON/VOLUME control knob to turn on the Pressing the SCAN button causes the tuner to search for radio. Press the ON/VOLUME control knob a second the next listenable station in AM, FM or Satellite (if time to turn off the radio.
Page 196 194 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 195 RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five 16-Digit Character Program Type seconds will allow the program format type to be se- Display lected. Many radio stations do not currently broadcast Jazz Jazz Music Type information. News News Toggle the MUSIC TYPE button to select the following...
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 197 NOTE: Turn the TUNE/SCROLL control knob to scroll 16-Digit Character Program Type through the entries. Push the AUDIO/SELECT button to Display select an entry and make changes. Top 40 Top 40 • DVD Enter - When the disc is in DVD Menu mode, Weather Weather selecting DVD Enter will allow you to play the current...
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL • Audio Stream – Repeatedly pressing SELECT will • VES™ CH1/CH2 - Allows the user to change the switch to different audio languages (if supported on mode of either the IR1 or IR2 wireless headphones by the disc) (if equipped).
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 Enter the four-digit country code using the TUNE/ Subtitles — If Equipped SCROLL control knob to scroll up and down to select the Selecting this item allows you to choose between subtitle number and then push to select. Off or On.
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The user will have to set these defaults before the SET button twice and SET 2 will show in the display loading a disc. If changes are made to these settings after window. Each button can be set for SET 1 and SET 2 in a disc is loaded, changes will not be effective.
Page 203: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
UNDERSTANDING YOUR INSTRUMENT PANEL 201 Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio. The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE) Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the with the corresponding number (1-6) where the CD currently playing.
Page 205: Notes On Playing Mp3/Wma Files
UNDERSTANDING YOUR INSTRUMENT PANEL 203 Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. •...
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MPEG Sampling Fre- Bit Rate (kbps) MP3/WMA tracks, the radio will only play the MP3/ Specification quency (kHz) WMA tracks on that disc. 320, 256, 224, MPEG-1 Audio 192, 160, 128, Supported MP3/WMA File Formats...
Page 207: List Button (Disc Mode For Mp3/Wma Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 205 Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play) When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders the radio checks all files on the medium. If the medium on the disc.
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode) to return to elapsed time display. No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
Page 209: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Operating Instructions — Voice Command System Macrovision (If Equipped) This product incorporates copyright protection technol- For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec- Uconnect™ User Manual located on the DVD for further tual property rights.
Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL sports, news, entertainment, and programming for chil- 1. The Electronic Serial Number/Sirius Identification dren, directly from its satellites and broadcasting studios. Number (ESN/SID). NOTE: Sirius service is not available in Hawaii and has 2. Your Vehicle Identification Number. limited coverage in Alaska.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 209 • Placing objects over or too close to the antenna can Satellite Antenna To ensure optimum reception, do not place items on the cause signal blockage. roof around the rooftop antenna location. Metal objects Operating Instructions - Uconnect™ Multimedia placed within the line of sight of the antenna will cause (Satellite) Mode decreased performance.
Page 212 210 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button TUNE Control (Rotary) Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 SETUP Button You may add a second channel to each pushbutton by Pressing the SETUP button allows you to select the repeating the above procedure with this exception: Press following items: the SET button twice and SET 2 will show in the display window.
Page 214: Media Center 130 (Sales Code Res)
212 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 to seek up and the left switch to seek down. The radio 4. Adjust the minutes using the right side TUNE/ will remain tuned to the new station until you make SCROLL control knob. Press the TUNE/SCROLL control another selection.
Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones.
Page 217: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 215 SET 2 in both AM and FM. This allows a total of 12 AM Operation Instructions — CD MODE For CD And and 12 FM stations to be stored into pushbutton memory. MP3 Audio Play The stations stored in SET 2 memory can be selected by NOTE: pressing the pushbutton twice.
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
Page 219: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 217 the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Medium Formats (File Systems) exceeding 20 folders will result in this display. With The medium formats supported by the radio are ISO 9660 200 files, exceeding 50 folders will result in this Level 1 and Level 2 and includes the Joliet extension. display.) When reading discs recorded using formats other than •...
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 160, 128, 144, extension may cause playback problems.
Page 222: Operation Instructions - Auxiliary Mode
220 UNDERSTANDING YOUR INSTRUMENT PANEL Loading times for playback of MP3 files may be affected MP3 player, or cassette player, and utilize the vehicle’s by the following: audio system to amplify the source and play through the vehicle speakers. • Media - CD-RW media may take longer to load than CD-R media Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
Page 223: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Command System (Radio) — If Equipped If your vehicle is not equipped with or this feature is not Refer to “Voice Command” in “Understanding The Fea- available on your vehicle, a “Not Equipped With tures If Your Vehicle”.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 4. Adjust the minutes using the right side TUNE/ RW/FF SCROLL control knob. Press the TUNE/SCROLL control Pressing the RW (Rewind) or FF (Fast Forward) buttons knob to save time change. causes the tuner to search for the next frequency in the direction of the arrows.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third or turning the TUNE/SCROLL control knob within five time and TREBLE will display. Turn the TUNE/SCROLL seconds will allow the program format type to be se- control knob to the right or left to increase or decrease the lected.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 16-Digit Character 16-Digit Character Program Type Program Type Display Display Jazz Jazz Top 40 Top 40 News News Weather Weather Nostalgia Nostalga By pressing the SEEK button when the Music Type icon Oldies Oldies is displayed, the radio will be tuned to the next frequency Personality Persnlty station with the same selected Music Type name.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL TUNE/SCROLL control knob. After adjusting the You may add a second station to each pushbutton by hours, press the TUNE/SCROLL control knob to set repeating the above procedure with this exception: Press the minutes. The minutes will begin to blink. Adjust the SET/RND button twice and SET 2 will show in the the minutes using the right side TUNE/SCROLL display window.
Page 229: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Operation Instructions — CD MODE for CD and If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD the current selection. Pressing and holding the SEEK Press the EJECT button to eject the CD. button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 231: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 229 SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL exceeding 20 folders will result in this display. With Supported MP3 File Formats 200 files, exceeding 50 folders will result in this The radio will recognize only files with the *.MP3 exten- display.) sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 Playback of MP3 Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification quency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...
Page 234: List Button (Cd Mode For Mp3 Play)
232 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
Page 235: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 233 TIME Button (Auxiliary Mode) radio system in your vehicle. Sirius will supply a wel- Press this button to change the display to time of day. The come kit that contains general information, including time of day will display for five seconds (when the how to setup your on-line listening account.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL using the TUNE/SCROLL control knob until Sirius ID is Reception Quality selected. Press the TUNE/SCROLL control knob and the Satellite reception may be interrupted due to one of the Sirius ID number will display. The Sirius ID number following reasons: display will time out in two minutes.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 SEEK Buttons additional three seconds will make the radio display the Press and release the SEEK buttons to search for the next Song Title all of the time (press and hold again to return channel in Satellite mode. Press the right switch to seek to normal display).
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music SET Button – To Set the Pushbutton Memory type. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. By pressing the SEEK button when the Music Type The symbol SET 1 will now show in the display window.
Page 239: Steering Wheel Audio Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™...
Page 240: Radio Operation
238 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the right hand control will go to the beginning of the current track or to the will switch modes to Radio or CD. beginning of the previous track if it is within one second after the current track begins to play.
Page 241: Radio Operation And Mobile Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 239 3. Do not apply paper or tape to the disc; avoid scratch- your radio. This condition may be lessened or eliminated ing the disc. by relocating the mobile phone antenna. This condition is not harmful to the radio. If your radio performance does 4.
Page 242: Air Conditioning And Heater
240 UNDERSTANDING YOUR INSTRUMENT PANEL Air Conditioning and Heater A light at the top of the SNOWFLAKE button shows that the air conditioning is on. Press the button a second time to turn the air conditioning off. Slight changes in engine speed or power may be noticed when the air conditioning compressor is on.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Recirculation Modes (Panel or Bi-Level ) Floor Select the recirculation modes when Outside air flows primarily through the floor out- the outside air contains dust, odors, lets located under the instrument panel. high humidity, or if rapid cooling is desired.
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL • For information on operating the rear defrost, refer to Temperature Control “Rear Window Features” in “Understanding The Fea- The rotary knob at the center of the tures Of Your Vehicle”. control panel controls the temperature of the interior air.
Page 245: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 243 edges of the instrument panel. The demisters also pro- Mode or Recirculation Mode Bi-level position. When a vide extra air ducts for circulation. They are in operation comfortable condition has been reached, choose a mode whenever the Floor, Mix, Defrost, or Bi-Level modes are position and adjust the temperature control knob and in use.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL speeds will reduce fogging. Interior fogging on the When using the air conditioner in extremely heavy windshield can be quickly removed by selecting the traffic, in hot weather, especially when towing a trailer, defrost mode. additional engine cooling may be required.
Page 247: Operation Tips Chart
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Operation Tips Chart...
Page 249: Starting And Operating
STARTING AND OPERATING CONTENTS ▫ Key Ignition Park Interlock ... . . 255 Starting Procedures ....251 ▫...
Page 250 248 STARTING AND OPERATING Driving On Slippery Surfaces ... . . 267 Tire Safety Information ....277 ▫...
Page 251 STARTING AND OPERATING 249 ▫ Full Size Spare – If Equipped ... . 291 ▫ Reformulated Gasoline ....304 ▫...
Page 252 250 STARTING AND OPERATING ▫ Starting ......311 ▫ Common Towing Definitions ... . 317 ▫...
Page 253: Starting Procedures
STARTING AND OPERATING 251 STARTING PROCEDURES NOTE: This vehicle is equipped with a transmission Before starting your vehicle, adjust your seat, adjust both shift interlocking system. The brake pedal must be inside and outside mirrors, and fasten your seat belts. pressed to shift out of PARK.
Page 254: Extreme Cold Weather (Below -20°F Or -29°C)
252 STARTING AND OPERATING Turn the ignition switch to the START position and WARNING! (Continued) release when the engine starts. If the engine fails to start • Do not attempt to push or tow your vehicle to get within 10 seconds, turn the key to the OFF position, wait it started.
Page 255: After Starting
STARTING AND OPERATING 253 After Starting CAUTION! The idle speed is automatically controlled and will de- crease as the engine warms up. To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to ENGINE BLOCK HEATER —...
Page 256: Automatic Transmission
254 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Do not shift from REVERSE, PARK, or NEUTRAL Remember to disconnect the engine block heater into any forward gear when the engine is above cord before driving. Damage to the 110-115 Volt idle speed.
Page 257: Key Ignition Park Interlock
STARTING AND OPERATING 255 Key Ignition Park Interlock on the right side of the steering column. To drive, move This vehicle is equipped with a Key Ignition Park Inter- the shift lever from PARK or NEUTRAL to the desired lock which requires the shift lever to be placed in PARK drive position.
Page 258 256 STARTING AND OPERATING WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure • Never use the PARK position as a substitute for those in and near the vehicle. As with all vehicles, the parking brake. Always apply the parking you should never exit a vehicle while the engine is brake fully when parked to guard against vehicle running.
Page 259 STARTING AND OPERATING 257 NEUTRAL when going down hill, use first gear. To prevent excessive This range is used when vehicle is standing for pro- engine speed do not exceed 25 mph (40 km/h) in this longed periods with engine running. Engine may be range.
Page 260 258 STARTING AND OPERATING • transmission reached normal operating Overdrive until the transmission cools down. After temperature. cool down, the transmission will resume normal operation. NOTE: • If the vehicle is started in extremely cold temperatures, The transmission will downshift from Overdrive to the transmission may not shift into Overdrive and will DRIVE if the accelerator pedal is fully pressed at vehicle automatically select the most desirable gear for opera-...
Page 261 STARTING AND OPERATING 259 economy), and automatic closed-throttle downshifts to normal operation. If the TOW/HAUL mode is desired, third gear (for improved braking) will occur during the switch must be pressed each time the engine is steady braking. started. Torque Converter Clutch A feature designed to improve fuel economy is included in all automatic transmissions.
Page 262: Four-Wheel Drive Operation - If Equipped
260 STARTING AND OPERATING the engine speed is higher when the torque converter FOUR-WHEEL DRIVE OPERATION — IF clutch is not engaged, it may seem as if the transmis- EQUIPPED sion is not shifting into Overdrive when cold. This is Transfer Case Operating Information/Precautions normal.
Page 263 STARTING AND OPERATING 261 The transfer case provides four mode positions: only. Driving in the 4WD LOCK and 4WD LOW posi- tions on dry hard-surfaced roads may cause increased • Two-wheel drive high range (2WD) tire wear and damage to the driveline components. •...
Page 264 262 STARTING AND OPERATING If one or more shift requirements are not met: WARNING! 1. An indicator light will flash. Always engage the parking brake when powering 2. The transfer case will not shift. down the vehicle if the “SVC 4WD Warning Light” is illuminated.
Page 265 STARTING AND OPERATING 263 Proper operation of four-wheel drive vehicles depends For additional information on the appropriate use of each on tires of equal size, type and circumference on each transfer case mode position, refer to the following infor- wheel. Any difference in tire size can cause damage to the mation: transfer case.
Page 266: Shifting Procedure
264 STARTING AND OPERATING maximum pulling power for loose or slippery road 2WD-to-4WD LOCK or 4WD LOCK-to-2WD surfaces only. Do not exceed 25 mph (40 km/h). Turn the transfer case switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped, or in motion.
Page 267 STARTING AND OPERATING 265 4WD LOCK-to-4WD LOW or 4WD LOW-to-4WD Alternate Procedure LOCK 1. Bring the vehicle to complete stop. NOTE: When shifting into or out of 4WD LOW, some 2. With the key ON and the engine either OFF or gear noise may be heard.
Page 268: Limited-Slip Rear Axle Differential - If Equipped
266 STARTING AND OPERATING • The ignition key must be ON for a shift to take place WARNING! and for the position indicator lights to be operable. If the key is not ON, then the shift will not take place and On vehicles equipped with a limited-slip differen- no position indicator lights will be on or flashing.
Page 269: Driving On Slippery Surfaces
STARTING AND OPERATING 267 DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 270: Driving Through Water
268 STARTING AND OPERATING DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 271 STARTING AND OPERATING 269 CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
Page 272: Off-Road Driving Tips
270 STARTING AND OPERATING OFF-ROAD DRIVING TIPS always a good idea to check for damage. That way you Care should be taken when attempting to climb steep can get any problems taken care of right away and have hills or driving diagonally across a hill or slope. If natural your vehicle ready when you need it.
Page 273: Power Steering
STARTING AND OPERATING 271 • After extended operation in mud, sand, water, or POWER STEERING similar dirty conditions, have the radiator, fan, brake The standard power steering system will give you good rotors, wheels, brake linings, and axle yokes inspected vehicle response and increased ease of maneuverability and cleaned as soon as possible.
Page 274: Power Steering Fluid Check
272 STARTING AND OPERATING system. This noise should be considered normal, and it checked if a leak is suspected, abnormal noises are does not in any way damage the steering system. apparent, and/or the system is not functioning as antici- pated.
Page 275: Parking Brake
STARTING AND OPERATING 273 If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied and place the shift lever in the...
Page 276 274 STARTING AND OPERATING When parking on a hill, it is important to turn the front WARNING! (Continued) wheels toward the curb on a downhill grade and away • Never leave children alone in a vehicle. Leaving from the curb on an uphill grade. Apply the parking unattended children in a vehicle is dangerous for a brake before placing the shift lever in PARK, otherwise number of reasons.
Page 277: Brake System
STARTING AND OPERATING 275 force required to slow or stop, and activation of the CAUTION! “Brake Warning Light” and the “ABS Warning Light” during brake use. If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction Four-Wheel Anti-Lock Brake System (ABS) is indicated.
Page 278 276 STARTING AND OPERATING WARNING! WARNING! (Continued) • The ABS cannot prevent collisions, including Pumping of the Anti-Lock Brakes will diminish their those resulting from excessive speed in turns, effectiveness and may lead to a collision. Pumping following another vehicle too closely, or hydro- makes the stopping distance longer.
Page 279: Tire Safety Information
STARTING AND OPERATING 277 TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 280 278 STARTING AND OPERATING • High flotation tire sizing is based on U.S. design Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- standards and it begins with the tire diameter molded tion.
Page 281 STARTING AND OPERATING 279 EXAMPLE: 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 282: Tire Identification Number (Tin)
280 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 283: Tire Terminology And Definitions
STARTING AND OPERATING 281 Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 284: Tire Loading And Tire Pressure
282 STARTING AND OPERATING Tire Loading And Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle...
Page 285 STARTING AND OPERATING 283 Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 286 284 STARTING AND OPERATING available cargo and luggage load capacity is 650 lbs NOTE: • The following table shows examples on how to calcu- (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations 5.
Page 287 STARTING AND OPERATING 285...
Page 288: Tires - General Information
286 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 289: Tire Inflation Pressures
STARTING AND OPERATING 287 Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side “B” Pillar. hicle to the other can cause the vehicle to drift to The pressure should be checked and adjusted as well as the right or left.
Page 290: Tire Pressures For High Speed Operation
288 STARTING AND OPERATING is defined as the tire pressure after the vehicle has not Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) been driven for at least three hours or driven less than during operation. Do not reduce this normal pressure 1 mile (1.6 km) after a three hour period.
Page 291: Radial Ply Tires
STARTING AND OPERATING 289 Cuts and punctures in radial tires are repairable only in WARNING! the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Spare Tire Matching Original Equipped Tire and tires could cause them to fail.
Page 292: Compact Spare Tire - If Equipped
290 STARTING AND OPERATING with one of the following types of non-matching tempo- Compact spare tire descriptions begin with the letter “T” rary use spares; compact, full size, or limited-use. or “S” preceding the size designation. Example: T145/ 80D18 103M. Do not install more than one non-matching temporary use spare tire/wheel on the vehicle at any given time.
Page 293: Full Size Spare - If Equipped
STARTING AND OPERATING 291 your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Compact spares are for temporary emergency use only. With these spares, do not drive more than Limited-Use Spare –...
Page 294: Tire Spinning
292 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In WARNING! Emergencies” for further information. Limited-use spares are for emergency use only. In- WARNING! stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the Fast spinning tires can be dangerous.
Page 295: Life Of Tire
STARTING AND OPERATING 293 Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread.
Page 296: Replacement Tires
294 STARTING AND OPERATING Replacement Tires WARNING! The tires on your new vehicle provide a balance of many • Do not use a tire, wheel size or rating other than characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu- that specified for your vehicle.
Page 297: Tire Chains
STARTING AND OPERATING 295 TIRE CHAINS WARNING! (Continued) • Failure to equip your vehicle with tires having CAUTION! adequate speed capability can result in sudden tire • The use of chains is permitted only on vehicles failure and loss of vehicle control. equipped with P245/70R16 tires.
Page 298 296 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Do not install tire chains on front wheels of To avoid damage to your vehicle, tires or chains, vehicles. observe the following precautions: • Do not drive for a prolonged period on dry pave- •...
Page 299: Snow Tires
STARTING AND OPERATING 297 If you need snow tires, select tires equivalent in size and CAUTION! type to the original equipment tires. Use snow tires only • Do not use tire chains on vehicles equipped with in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
Page 300: Tire Rotation Recommendations
298 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “forward cross” The tires on the front and rear of your vehicle operate at shown in the following diagram. This rotation pattern different loads and perform different steering, driving, does not apply to some directional tires that must not be and braking functions.
Page 301: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 299 TIRE PRESSURE MONITOR SYSTEM (TPMS) TPMS will warn the driver of a low tire pressure if the tire The Tire Pressure Monitoring System (TPMS) will warn pressure falls below the low pressure warning threshold the driver of a low tire pressure based on the vehicle for any reason, including low temperature effects, or recommended cold placard pressure (the placard is lo- natural pressure loss through the tire.
Page 302 300 STARTING AND OPERATING 33 psi (227 kPa). If the ambient temperature is 68°F (20°C) CAUTION! and the measured tire pressure is 28 psi (193 kPa), a • The TPMS has been optimized for the original temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 24 psi (165 kPa).
Page 303: Base System
STARTING AND OPERATING 301 • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance, or to provide warning of a tire the tire.
Page 304 302 STARTING AND OPERATING The “Tire Pressure Monitoring Telltale Light” will the fault condition no longer exists. A system fault can illuminate in the instrument cluster, and an au- occur by any of the following scenarios: 1) Jamming due dible chime will be activated when one or more of to electronic devices or driving next to facilities emitting the four active road tire pressures are low.
Page 305: General Information
STARTING AND OPERATING 303 limit, upon the next ignition key cycle a chime will sound General Information and the “TPM Telltale Light” will still turn ON due to the This device complies with part 15 of the FCC rules and low tire.
Page 306: Fuel Requirements
304 STARTING AND OPERATING FUEL REQUIREMENTS Over 40 auto manufacturers worldwide, have issued and These engines are designed to meet all endorsed consistent gasoline specifications (the World- emissions regulations, and provide excel- wide Fuel Charter, WWFC), which define fuel properties lent fuel economy and performance when necessary to deliver enhanced emissions, performance, using high quality unleaded “regular”...
Page 307: Gasoline/Oxygenate Blends
STARTING AND OPERATING 305 Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle.
Page 308: Mmt In Gasoline
306 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with of gasoline may not be indicated on the gasoline pump, E-85 perform the following: therefore, you should ask your gasoline retailer whether gasoline contains MMT. It is even more important to look •...
Page 309: Fuel System Cautions
STARTING AND OPERATING 307 Fuel System Cautions CAUTION! (Continued) • When pulling a heavy load or driving a fully CAUTION! loaded vehicle when the humidity is low and the Follow these guidelines to maintain your vehicle’s temperature is high, use a premium unleaded fuel performance: to help prevent spark knock.
Page 310: Carbon Monoxide Warnings
308 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 311: Ethanol Fuel (E-85)
STARTING AND OPERATING 309 E-85 Fuel Cap E-85 Badge Ethanol Fuel (E-85) CAUTION! E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Only vehicles with the E-85 fuel filler door label can operate on E-85.
Page 312: Fuel Requirements
310 STARTING AND OPERATING • you do not add less than 5 gallons (19 Liters) when WARNING! refueling Ethanol vapors are extremely flammable and could • you operate the vehicle immediately after refueling for cause serious personal injury. Never have any smok- a period of at least 5 minutes ing materials lit in or near the vehicle when remov- Observing these precautions will avoid possible hard...
Page 313: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
(mpg)/miles per liter and your driving range to decrease tensive fleet testing, to provide additional protection to by about 30%, compared to gasoline operation. Chrysler Group LLC engines. Use MOPAR or an equivalent oil meeting the specification MS-6395. Replacement Parts...
Page 314: Maintenance
312 STARTING AND OPERATING CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle. Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. Gas Cap Holder ADDING FUEL If the gas cap is lost or damaged, be sure the replacement...
Page 315 STARTING AND OPERATING 313 CAUTION! WARNING! (Continued) • A fire may result if gasoline is pumped into a • Damage to the fuel system or emissions control portable container that is inside of a vehicle or on system could result from using an improper fuel a truck bed.
Page 316: Loose Fuel Filler Cap Message
314 STARTING AND OPERATING Loose Fuel Filler Cap Message After fuel has been added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. If the system detects a malfunction, the “gASCAP” message will display in the odometer display.
Page 317 STARTING AND OPERATING 315 hour of manufacture. The bar code that appears on the Each axle GAWR is determined by the component in the bottom of the label is your Vehicle Identification Number system with the lowest load carrying capacity (axle, (VIN).
Page 318: Curb Weight
316 STARTING AND OPERATING Curb Weight the front or rear axles has been exceeded but the total The curb weight of a vehicle is defined as the total weight load is within the specified GVWR. If so, weight must be of the vehicle with all fluids, including vehicle fuel, at full shifted from front to rear or rear to front as appropriate capacity conditions, and with no occupants or cargo...
Page 319: Trailer Towing
STARTING AND OPERATING 317 TRAILER TOWING Gross Trailer Weight (GTW) In this section you will find safety tips and information The GTW is the weight of the trailer plus the weight of all on limits to the type of towing you can reasonably do cargo, consumables and equipment (permanent or tem- with your vehicle.
Page 320 318 STARTING AND OPERATING rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- Frontal Area tion Label” in “Starting and Operating” for further The frontal area is the maximum height multiplied by the information. maximum width of the front of a trailer. Weight-Carrying Hitch WARNING! A weight-carrying hitch supports the trailer tongue...
Page 321 STARTING AND OPERATING 319 safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier tongue weights and may be required depending on vehicle and trailer configuration/loading to comply with Gross Axle Weight Rating (GAWR) requirements.
Page 322 320 STARTING AND OPERATING EXAMPLE — With Weight-Distributing Hitch (Correct) EXAMPLE — Improper Adjustment of Weight- Distributing Hitch (Incorrect)
Page 323: Trailer Hitch Classification
STARTING AND OPERATING 321 Trailer Hitch Classification Trailer Hitch Classification Definitions The rear bumper is intended to tow trailers up to Class Max. Trailer Hitch Industry 2,000 lbs (907 kg) without added equipment or altera- Standards tions to the standard equipment. Your vehicle may be Class I - Light Duty 2,000 lbs (907 kg) factory equipped for safe towing of trailers weighing...
Page 324: Trailer Towing Weights (Maximum Trailer Weight Ratings)
322 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) NOTE: For additional trailer towing information in- cluding maximum trailer and tongue weight rating for your vehicle, refer to the following website addresses: • http:// www.dodge.com/bodybuilder • http:// www.dodge.ca (Canada) Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer.
Page 325: Towing Requirements
STARTING AND OPERATING 323 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options, or dealer-installed options, trailer is towed, do not drive over 50 mph must be considered as part of the total load on your (80 km/h) and do not make starts at full throttle.
Page 326 324 STARTING AND OPERATING WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 327 STARTING AND OPERATING 325 − Check the trailer tires for proper tire inflation pres- WARNING! (Continued) sures before trailer usage. 2. GTW − Check for signs of tire wear or visible tire damage 3. GAWR before towing a trailer. For the proper inspection 4.
Page 328 326 STARTING AND OPERATING − An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
Page 329 STARTING AND OPERATING 327 The Trailer Tow Package may include a four and seven- pin wiring harness. Use a factory approved trailer har- ness and connector. NOTE: Do not cut or splice wiring into the vehicle’s wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector.
Page 330: Towing Tips
328 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic Transmission The “DRIVE” range can be selected when towing. How- ever, if frequent shifting occurs while in this range, the TOW/HAUL feature should be selected.
Page 331: Snowplow
STARTING AND OPERATING 329 NOTE: Check the automatic transmission fluid level Cooling System before towing. To reduce potential for engine and transmission over- heating, take the following actions: Tow/Haul – If Equipped To reduce potential for automatic transmission overheat- − City Driving ing, turn the TOW/HAUL feature ON when driving in When stopped for short periods of time, shift the trans- hilly areas or shift the transmission to Drive position 2 on...
Page 332: Recreational Towing (Behind Motorhome, Etc.)
330 STARTING AND OPERATING Four-Wheel Drive Models WARNING! CAUTION! Do not add a snow plow, winches, or any other aftermarket equipment to the front of your vehicle. • Internal damage to the transfer case will occur if a This could adversely affect the functioning of the front or rear wheel lift is used when recreational airbag system in a collision and you could be injured.
Page 333 STARTING AND OPERATING 331 Recreational Towing Procedure CAUTION! WARNING! It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL before recre- You or others could be injured if you leave the ational towing to prevent damage to internal parts. vehicle unattended with the transfer case in the NEUTRAL position without first fully engaging the 1.
Page 334 332 STARTING AND OPERATING 6. Using the point of a ballpoint pen or similar object, 9. Shift the transmission into REVERSE. press the transfer case NEUTRAL button for four sec- 10. Release the brake pedal for five seconds and ensure onds.
Page 335 STARTING AND OPERATING 333 prior to pressing the NEUTRAL button or are no CAUTION! longer met during the four second timer, then the NEUTRAL indicator light will flash continuously until Damage to the transmission may occur if the trans- all requirements are met or until the NEUTRAL button mission is shifted into PARK with the transfer case in is released.
Page 336 334 STARTING AND OPERATING 5. Press the brake pedal. NOTE: • Steps 1 through 5 are requirements that must be met 6. Shift the transmission into NEUTRAL. prior to pressing the NEUTRAL button, and must 7. Using the point of a ballpoint pen or similar object, continue to be met until one second elapses and the press the recessed transfer case NEUTRAL button for one shift has been completed.
Page 337 STARTING AND OPERATING 335 CAUTION! • Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. • Do not disconnect the rear driveshaft because fluid will leak from the transfer case and damage internal parts.
Page 339: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS ▫ Preparations For Jump-Start ... . . 350 Hazard Warning Flashers ....338 ▫...
Page 340: Hazard Warning Flashers
338 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS turn signals will flash on and off to warn oncoming traffic The Hazard Warning flasher switch is located on the top of an emergency. Press the switch a second time to turn of the steering column, just behind the steering wheel.
Page 341: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 339 JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
Page 342 340 WHAT TO DO IN EMERGENCIES A finger-operated helper tool is provided to assist re- moval and stowage of the jack. This tool must be removed to operate the jack for changing the spare tire. Jack Screw Jack Stowage Location (Extended Cab)
Page 343: Removing The Spare Tire
WHAT TO DO IN EMERGENCIES 341 WARNING! The jack is designed as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes, unless suitable supports are placed under the vehicle as a safety measure. The vehicle should be jacked on a firm level surface only.
Page 344 342 WHAT TO DO IN EMERGENCIES Steps for Removing the Spare Tire • Remove the jack from the stowage compartment using the supplied finger-assist tool. • Remove the finger-assist tool from jack and set aside until jack is stowed. • Assemble the jack tools. •...
Page 345 WHAT TO DO IN EMERGENCIES 343 Turning Lug Wrench and Extension Spare Tire Stowage Location It is recommended that you stow the flat or spare to NOTE: The winch mechanism is designed for use with avoid tangling the loose cable. the jack extension tube only.
Page 346: Preparations
344 WHAT TO DO IN EMERGENCIES Preparations 6. Block both the front and rear of the wheel diagonally opposite the jacking 1. Park the vehicle on a firm, level surface. Avoid icy or position. For example, if the right front slippery areas.
Page 347 WHAT TO DO IN EMERGENCIES 345 WARNING! (Continued) WARNING! (Continued) • Always park on a firm, level surface as far from • If working on or near a roadway, be extremely the edge of the roadway as possible before raising careful of motor traffic.
Page 348 346 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Lower and remove the spare wheel, jack, and tools from stowage. 2.
Page 349 WHAT TO DO IN EMERGENCIES 347 Left Rear Jacking Location Right Rear Jacking Location NOTE: Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. 5.
Page 350 348 WHAT TO DO IN EMERGENCIES WARNING! WARNING! Raising the vehicle higher than necessary can make A loose tire or jack thrown forward in a collision or the vehicle unstable and cause a collision. It could hard stop could injure someone in the vehicle. Al- slip off the jack and hurt someone near it.
Page 351: To Stow The Flat Or Spare
WHAT TO DO IN EMERGENCIES 349 To Stow The Flat Or Spare WARNING! (Continued) Turn the wheel so that the valve stem is down. Slide the • Always park on a firm, level surface as far from wheel retainer through the center of the wheel and the edge of the roadway as possible before raising position it properly across the wheel opening.
Page 352: Preparations For Jump-Start
350 WHAT TO DO IN EMERGENCIES another vehicle or by using a portable battery booster Preparations For Jump-Start pack. Jump-starting can be dangerous if done improperly The battery in your vehicle is located in the front of the so please follow the procedures in this section carefully. engine compartment, behind the left headlight assembly.
Page 353: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 351 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 354 352 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the cable to the negative post (-) of the damage to the charging system of the booster vehicle discharged battery. The resulting electrical spark or the discharged vehicle.
Page 355: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 353 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE cable from the positive (+) post of the booster battery. If vehicle becomes stuck in snow, sand, or mud, it can often be moved by a rocking motion.
Page 356: Emergency Tow Hooks - If Equipped
354 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Fast spinning tires can be dangerous. Forces gener- Revving the engine or spinning the wheels too fast ated by excessive wheel speeds may cause damage, or may lead to transmission overheating and failure. It even failure, of the axle and tires.
Page 357 WHAT TO DO IN EMERGENCIES 355 WARNING! (Continued) • Stand clear of vehicles when pulling with tow hooks. Tow straps and chains may break, causing serious injury. CAUTION! Tow hooks are for emergency use only, to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing.
Page 358: Towing A Disabled Vehicle
356 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE rear wheels on the ground. The speed must not exceed Proper towing or lifting equipment is required to prevent 30 mph (50 km/h), and the distance must not exceed damage to your vehicle. Use of safety chains is recom- 15 miles (25 km).
Page 359: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil ......365 Engine Compartment — 3.7L ... . . 359 ▫...
Page 360 358 MAINTAINING YOUR VEHICLE ▫ Cooling System ..... 375 ▫ Headlamp (Halogen)/Front Park And Turn Signal Lamps ..... . . 398 ▫...
Page 361: Engine Compartment - 3.7L
MAINTAINING YOUR VEHICLE 359 ENGINE COMPARTMENT — 3.7L 1 — Air Cleaner Filter 7 — Power Steering Fluid Reservoir 2 — Automatic Transmission Dipstick 8 — Engine Oil Fill 3 — Engine Oil Dipstick 9 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 10 —...
Page 362: Engine Compartment - 4.7L
360 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 4.7L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic Transmission Dipstick 8 — Power Steering Fluid Reservoir 3 — Engine Oil Dipstick 9 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 10 —...
Page 363: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 361 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 364: Emissions Inspection And Maintenance Programs
362 MAINTAINING YOUR VEHICLE the message will appear the next time the vehicle is serviced, recently had a dead battery or a battery replace- started. This might indicate a damaged cap. If the prob- ment. If the OBD II system should be determined not lem is detected twice in a row, the system will turn on the ready for the I/M test, your vehicle may fail the test.
Page 365: Replacement Parts
MAINTAINING YOUR VEHICLE 363 a. The MIL will flash for about 10 seconds and then vehicle operation you should have your vehicle serviced return to being fully illuminated until you turn OFF before going to the I/M station. The I/M station can fail the ignition or start the engine.
Page 366: Maintenance Procedures
Immediately have potential malfunctions chanic. examined by an authorized Chrysler Group LLC dealership or qualified repair center. MAINTENANCE PROCEDURES (Continued) The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle.
Page 367: Engine Oil
MAINTAINING YOUR VEHICLE 365 Checking the oil while the vehicle is on level ground will CAUTION! (Continued) improve the accuracy of the oil level readings. Always • Your vehicle has been built with improved fluids maintain the oil level within the SAFE zone on the that protect the performance and durability of dipstick.
Page 368 366 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change CAUTION! intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is Engine Oil Selection not covered by the New Vehicle Limited Warranty.
Page 369: Engine Oil Filter
MAINTAINING YOUR VEHICLE 367 Synthetic Engine Oils station, or governmental agency for advice on how and You may use synthetic engine oils, provided the recom- where used oil and oil filters can be safely discarded in mended oil quality requirements are met, and the recom- your area.
Page 370: Maintenance-Free Battery
368 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- The air induction system (air cleaner, hoses, etc) can tenance required. provide a measure of protection in the case of engine backfire.
Page 371: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 369 WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep • It is essential when replacing the cables on the flame or sparks away from the battery. Do not use battery that the positive cable is attached to the a booster battery or any other booster source with positive post and the negative cable is attached to an output greater than 12 Volts.
Page 372 370 MAINTAINING YOUR VEHICLE include cleaning of the condenser fins and a performance WARNING! test. Drive belt tension should also be checked at this • Use only refrigerants and compressor lubricants time. approved by the manufacturer for your air condi- CAUTION! tioning system.
Page 373: Body Lubrication
MAINTAINING YOUR VEHICLE 371 Refrigerant Recovery And Recycling hood latching components to ensure proper function. R-134a air conditioning refrigerant is a hydrofluoro- When performing other underhood services, the hood carbon (HFC) that is endorsed by the Environmental latch, release mechanism and safety catch should be Protection Agency (EPA), and is an ozone-saving prod- cleaned and lubricated.
Page 374: Adding Washer Fluid
372 MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from exceeds the temperature range of your climate. This the windshield. Keep the blade rubber out of contact with rating information can be found on most washer fluid petroleum products such as engine oil, gasoline, etc.
Page 375 MAINTAINING YOUR VEHICLE 373 have an authorized technician inspect the complete ex- WARNING! (Continued) haust system and adjacent body areas for broken, dam- • A hot exhaust system can start a fire if you park aged, deteriorated, or mispositioned parts. Open seams over materials that can burn.
Page 376 374 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control CAUTION! (Continued) systems can result in civil penalties being assessed • Damage to the catalytic converter can result if your against you. vehicle is not kept in proper operating condition. In unusual situations involving grossly malfunctioning In the event of engine malfunction, particularly engine operation, a scorching odor may suggest severe...
Page 377: Cooling System
MAINTAINING YOUR VEHICLE 375 • Do not idle the engine with any spark plug wires rusty in appearance, the system should be drained, disconnected or removed, such as when diagnostic flushed and refilled with fresh engine coolant (anti- testing, or for prolonged periods during very rough freeze).
Page 378 376 MAINTAINING YOUR VEHICLE Cooling System – Drain, Flush, And Refill CAUTION! If the engine coolant (antifreeze) is dirty or contains a • Mixing of engine coolant (antifreeze) other than considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough specified HOAT engine coolant (antifreeze) may rinsing to remove all deposits and chemicals.
Page 379 MAINTAINING YOUR VEHICLE 377 • The manufacturer recommends using MOPAR CAUTION! (Continued) Antifreeze/Coolant 5 Year/100,000 Mile Formula • This vehicle has not been designed for use with HOAT (Hybrid Organic Additive Technology) or Propylene Glycol-based engine coolant (anti- equivalent. freeze). Use of Propylene Glycol-based engine •...
Page 380 378 MAINTAINING YOUR VEHICLE NOTE: Mixing engine coolant (antifreeze) types will WARNING! decrease the life of the engine coolant (antifreeze) and • The warning words “DO NOT OPEN HOT” on will require more frequent coolant changes. the cooling system pressure cap are a safety pre- Cooling System Pressure Cap caution.
Page 381 MAINTAINING YOUR VEHICLE 379 rules for your community. To prevent ingestion by ani- the engine coolant (antifreeze). Advise your service at- mals or children do not store ethylene glycol-based tendant of this. As long as the engine operating tempera- engine coolant (antifreeze) in open containers or allow it ture is satisfactory, the coolant recovery bottle need only to remain in puddles on the ground.
Page 382: Brake System
380 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be bottle overflow hoses are not kinked or obstructed. safely driven.
Page 383 MAINTAINING YOUR VEHICLE 381 the brake master cylinder. Be sure to clean the top of the WARNING! master cylinder area before removing the cap. With disc • Use only manufacturer’s recommended brake brakes, the fluid level can be expected to fall as the brake pads wear.
Page 384: Automatic Transmission
382 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 385 MAINTAINING YOUR VEHICLE 383 Special Additives least 15 miles (24 km) of driving. At normal operating Automatic Transmission Fluid (ATF) is an engineered temperature the fluid cannot be held comfortably be- product and its performance may be impaired by supple- tween the fingertips.
Page 386 384 MAINTAINING YOUR VEHICLE (upper) reference holes on the dipstick at normal operat- CAUTION! ing temperature. Verify that solid coating of oil is seen on both sides of the dipstick. If the fluid is low, add as Be aware that if the fluid temperature is below 50° F required into the dipstick tube.
Page 387: Transfer Case
MAINTAINING YOUR VEHICLE 385 Transfer Case CAUTION! Inspect the transfer case for fluid leaks. If a fluid leak is • Do not use chemical flushes in your transmission evident the transfer case fluid level may be low. Have the transfer case serviced immediately. as the chemicals can damage your transmission components.
Page 388: Front/Rear Axle Fluid
386 MAINTAINING YOUR VEHICLE Front/Rear Axle Fluid axle fluid level should be 1/8 in (3 mm) below bottom of filler plug for 8-1/4 in, and 9-1/4 in axles. For normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons Drain And Refill the exterior surfaces of the axle assembly should be Refer to the “Maintenance Schedule”...
Page 389 MAINTAINING YOUR VEHICLE 387 • Insects, tree sap and tar passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly • Salt in the air near seacoast localities corrosive to the metal in your vehicle. Outside parking, •...
Page 390 388 MAINTAINING YOUR VEHICLE • Avoid using abrasive compounds and power buffing • If you detect any stone chips or scratches in the paint, that may diminish the gloss or thin out the paint touch them up immediately. The cost of such repairs is finish.
Page 391 MAINTAINING YOUR VEHICLE 389 • For tough stains, apply MOPAR Wheel And Wheel Trim Care Total Clean or All wheels and wheel trim, especially aluminum and equivalent or a mild soap solution to a clean, damp chrome-plated wheels, should be cleaned regularly with cloth and remove the stain.
Page 392 390 MAINTAINING YOUR VEHICLE if absolutely necessary. Do not use harsh cleaners or your leather upholstery. Application of a leather condi- Armor All . Use MOPAR Total Clean or equivalent to tioner is not required to maintain the original condition. clean vinyl upholstery.
Page 393: Fuses
MAINTAINING YOUR VEHICLE 391 When cleaning the rearview mirror, spray cleaner on the If the belts need cleaning, use a mild soap solution or towel or rag that you are using. Do not spray cleaner lukewarm water. Do not remove the belts from the car to directly on the mirror.
Page 394 392 MAINTAINING YOUR VEHICLE CAUTION! When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it suggests a problem in the circuit that must be corrected.
Page 395 MAINTAINING YOUR VEHICLE 393 Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse Spare 2 Amp Run/Start Ignition Gray Switch Spare 10 Amp AC Clutch 30 Amp Electric Brake Pink 15 Amp Trailer Tow Lt 50 Amp Power Seat Blue Stop/Turn...
Page 396 394 MAINTAINING YOUR VEHICLE Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 20 Amp Fuel Pump 15 Amp Instrument Cluster Yellow Blue Illumination 15 Amp Rear Center Brake 20 Amp Ignition Run/Start Blue Lamp Yellow Feed 20 Amp Instrument 10 Amp...
Page 397 MAINTAINING YOUR VEHICLE 395 Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 30 Amp Automatic Shut- 30 Amp Wiper Motor Pink down Pink 30 Amp Body Control Mod- 25 Amp Body Control Mod- Pink ule 2 (Ext. Light # Natural ule 5 (T-Case) 10 Amp...
Page 398: Vehicle Storage
396 MAINTAINING YOUR VEHICLE Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 30 Amp Trailer Tow B+ 20 Amp Heated Seats Pink Yellow 40 Amp Antilock Brakes 10 Amp Climate Control Green Module (Pump) System Module 40 Amp Park Lamps 10 Amp...
Page 399: Replacement Bulbs
MAINTAINING YOUR VEHICLE 397 • Or, disconnect the negative cable from the battery. LIGHT BULBS – Exterior Bulb No. Headlamp ......H13 •...
Page 400: Bulb Replacement
398 MAINTAINING YOUR VEHICLE BULB REPLACEMENT 3. Grasp the headlamp and pull firmly to disengage the headlamp housing from the fender panel. Headlamp (Halogen)/Front Park and Turn Signal Lamps 4. While firmly holding the headlamp housing in your hands, unlock and disconnect headlamp bulb connector. 1.
Page 401: Rear Side Marker, Taillamps/Stop Lamps, And Turn Signal Bulbs
MAINTAINING YOUR VEHICLE 399 NOTE: The headlamp bulb is a halogen bulb. Take care Rear Side Marker, Taillamps/Stop Lamps, And not to touch the bulb with your fingers. Body oils from Turn Signal Bulbs your fingers could cause excessive heat buildup which 1.
Page 402 400 MAINTAINING YOUR VEHICLE 2. Pull the taillamp housing straight out from the body. 3. Rotate the bulb socket counterclockwise to remove it from the housing.
Page 403 MAINTAINING YOUR VEHICLE 401 4. Pull bulb straight out of socket. 5. Reverse this procedure to install bulb and housing. Place the two raised blocks past the body.
Page 404: Center High-Mounted Stop Lamp And Cargo
402 MAINTAINING YOUR VEHICLE Center High-Mounted Stop Lamp And Cargo 2. Remove housing from the cab. Lamp 1. Remove the two screws holding the housing/lens to the body, as shown.
Page 405 MAINTAINING YOUR VEHICLE 403 3. Remove connector from housing tab for more clear- 4. Turn desired bulb socket 1/4-turn and remove socket ance. and bulb from housing.
Page 406: License Lamps
404 MAINTAINING YOUR VEHICLE 5. Pull desired bulb straight from the socket. License Lamps 1. Using a screwdriver, pry black rubber housing from the bumper. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High Mounted Stop Lamp 6. Reverse this procedure for installation of bulbs and housing.
Page 407: Fog Lamps
MAINTAINING YOUR VEHICLE 405 2. Rotate the socket 1/4-turn counterclockwise. 4. Reverse this procedure for installation. 3. Pull bulb from socket. Fog Lamps 1. Disconnect connector from the fog lamp by raising the wire harness lock tab and pulling on wire harness connector.
Page 408: Fluid Capacities
406 MAINTAINING YOUR VEHICLE 2. Rotate the bulb 1/4-turn counterclockwise and pull to remove from the fog lamp housing. 3. Reverse procedure to install. FLUID CAPACITIES U.S. Metric Fuel (Approximate) 22 Gallons 83 Liters Engine Oil with Filter 3.7L Engine (SAE 5W-20, API Certified) 5 Quarts 4.7 Liters 4.7L Engine (SAE 5W-20, API Certified)
Page 409: Fluids, Lubricants And Genuine Parts
MAINTAINING YOUR VEHICLE 407 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 410: Chassis
408 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Transfer Case MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Front Axle SAE 75W-90 Multi-Purpose Type, GL-5 Gear Lubricant (MS-9763) or equivalent.
Page 411 MAINTENANCE SCHEDULES CONTENTS ▫ Required Maintenance Intervals ..412 Maintenance Schedule ....410...
Page 412 410 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE NOTE: • The oil change indicator message will not monitor the The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified time since the last oil change. Change your vehicle’s to protect your vehicle warranty and ensure the best oil if it has been six months since your last oil change, vehicle performance and reliability.
Page 413 MAINTENANCE SCHEDULES 411 • Inspect the battery, and clean and tighten the terminals “Understanding Your Instrument Panel” or under “In- strument Cluster Description/Odometer/Trip Odom- as required. eter” in “Understanding Your Instrument Panel” for • Check the fluid levels of the coolant reservoir, brake further information.
Page 414 412 MAINTENANCE SCHEDULES Required Maintenance Intervals NOTE: ** Vehicles built with the 4.7L engine are equipped with sixteen spark plugs. One set is located on the top of the engine under the coils and the second set is located on the side of the engine. The spark plugs located under the coils are a standard plug and must be changed every 48,000 miles (78 000 km).
Page 415 MAINTENANCE SCHEDULES 413 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 416: Service Schedule
414 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 417 MAINTENANCE SCHEDULES 415 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 418 416 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 419 MAINTENANCE SCHEDULES 417 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 420 418 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer Reading Date Repair Order #...
Page 421 MAINTENANCE SCHEDULES 419 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 422 420 MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 423 MAINTENANCE SCHEDULES 421 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏...
Page 424 422 MAINTENANCE SCHEDULES 128,000 Miles (208,000 km) or 96 Months Maintenance Service 136,000 Miles (221,000 km) or Schedule 102 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 425 MAINTENANCE SCHEDULES 423 144,000 Miles (234,000 km) or 108 Months Maintenance Service 152,000 Miles (247,000 km) or Schedule 114 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 426 424 MAINTENANCE SCHEDULES † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
Page 427: If You Need Consumer Assistance
Reporting Safety Defects ....430 ▫ Chrysler Group LLC Customer Center ..428 ▫ In The 50 United States And Washington, D.C.
Page 428 426 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 433 Department Of Transportation Uniform Tire Quality Grades ......432 ▫...
Page 429: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 427 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 430: Chrysler Group Llc Customer Center
• Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004...
Page 431: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 429 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 432: Warranty Information
See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 433: In Canada
Customer Service Department need in diagnosing/troubleshooting, problem solving, immediately. Canadian customers who wish to report a maintaining, servicing, and repairing Chrysler Group safety defect to the Canadian government should contact LLC vehicles. A complete working knowledge of the...
Page 434: Department Of Transportation Uniform Tire
432 IF YOU NEED CONSUMER ASSISTANCE vehicle, system, and/or components is written in acquaint you with specific Chrysler Group LLC ve- straightforward language with illustrations, diagrams, hicles. Included are starting, operating, emergency and charts. and maintenance procedures as well as specifications, capabilities and safety tips.
Page 435: Traction Grades
IF YOU NEED CONSUMER ASSISTANCE 433 in each category is shown on the sidewall of the tires on wet pavement, as measured under controlled conditions your vehicle. on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- All passenger car tires must conform to Federal safety mance.
Page 436 434 IF YOU NEED CONSUMER ASSISTANCE grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A repre- sent higher levels of performance on the laboratory test wheel, than the minimum required by law.
Page 437 INDEX...
Page 438 436 INDEX Adding Engine Coolant (Antifreeze) ..377 Alterations/Modifications, Vehicle ... . . 7 Adding Fuel ......312 Antenna, Satellite Radio .
Page 439 INDEX 437 Gear Ranges ......255 Brake/Transmission Interlock ....255 Special Additives .
Page 440 438 INDEX Changing A Flat Tire ..... 339 Console, Floor ......166 Chart, Tire Sizing .
Page 441 INDEX 439 Cupholders ......163 Door Locks, Automatic ....29 Customer Assistance .
Page 442 440 INDEX Break-In Recommendations ....75 Exterior Lighting ......135 Coolant (Antifreeze) .
Page 443 INDEX 441 Floor Console ......166 Ethanol ......305 Fluid Capacities .
Page 444 442 INDEX Speedometer ......181 Lights On Reminder ....136 Tachometer .
Page 445 INDEX 443 Instrument Cluster ..... . . 179 Lane Change and Turn Signals ..138,179,399 Instrument Panel and Controls .
Page 446 444 INDEX Daytime Running ..... . 136 Voltage ......181 Exterior .
Page 447 INDEX 445 Maintenance Free Battery ....368 New Vehicle Break-In Period ....75 Maintenance Procedures .
Page 448 446 INDEX Synthetic ......367 Phone, Cellular ......88 Viscosity .
Page 449 INDEX 447 Radial Ply Tires ......289 Remote Keyless Entry (RKE) ....20 Radiator Cap (Coolant Pressure Cap) .
Page 450 448 INDEX Satellite Radio Antenna ....209,234 Selection of Coolant (Antifreeze) ..376,407 Schedule, Maintenance ....410 Selection of Oil .
Page 451 INDEX 449 Signals, Turn ....79,138,179,399 Storage ....... 396 Snow Chains (Tire Chains) .
Page 452 450 INDEX Tire Safety Information ....277 Sizes ....... 278 Tires .
Page 453 INDEX 451 Hitches ......321 Tread Wear Indicators ....292 Minimum Requirements .
Page 454 452 INDEX Voice Recognition System (VR) ....119 Wheel Nut Torque ..... . . 348 Wind Buffeting .
Page 455 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 456 Chrysler Group LLC Fifth Edition 11ND33-126-AE Printed in U.S.A.

This manual is also suitable for:

2011 dakota

Dodge Dakota 2011 Owner's Manual

Table of Contents

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

What to Do in Emergencies

Maintaining Your Vehicle

Quick Links

Chapters

Related Manuals for Dodge Dakota 2011

Summary of Contents for Dodge Dakota 2011