What Happens In Each Cycle - Hotpoint HDA2000M Use And Care Manual

WASHING
NORMAL
The dishwasher remembers your
last cycle* so you don't have to
reprogram each time.
When the dishwasher is loaded
and the door is latched, the control
panel will display the last settings
you selected.
If you don't want to change any of
the settings, simply touch START.
power failure,
*If there has been a
NORMAL WASH and HEATED
DRY will automatically be
programmed. Make any new
selections as desired and touch
START.

What happens in each cycle

Water Use
WASH CYCLES
NORMAL WASH
LIGHT WASH
CHINA-CRYSTAL
RINSE & HOLD
*unextended times. These cycle
times may be increased up ~o 15
minutes if necessary for your
dishwasher to heat the water to
proper temperature for good
washability.
11.0 gal.
Pre-Wash/ Pre-Rinse
Pre-Rinse
11.0 gal.
Pre-Wash/ Pre-Rinse
Pre-Rinse
9.3 gal. Pre-Rinse Pre-Rinse
7.7 gal. Pre-Rinse
3.7 gal. Pre-Rinse Pre-Rinse
Dry Options:
HEATED DRY. Available on all
wash cycles except RINSE &
HOLD. Add 33 minutes to wash
cycle time.
ENERGY SAVER DRYING.
Drying heater is turned off. Dishes
dry naturally.
Cycle Sequence
Pre-Rinse Main
Wash
Pre-Rinse Main
Wash
Main Rinse
Wash
Main Rinse Rinse
Wash
6
Wash
Cycle Time
Rinse Rinse *64 minutes
Rinse Rinse
Rinse
41 minutes
10 minutes