Paradox 1686V User Manual page 22

Led keypads
Hide thumbs Also See for 1686V:
Table of Contents

Advertisement

How do I Program Bypass Entries?
1) Press the [
2) Enter your [
3) Illuminate the button(s) corresponding to the zone(s) you
wish to bypass by pressing the corresponding button.
Press the button again to turn it off. Press the [
button to erase all the current zone bypass entries.
4) Once you have entered the desired bypass entries,
press the [
] button will turn on when zones are bypassed. The
T
[
BYP
HE
next time the system is armed, the zones will be bypassed.
NOTE1: If you have access to both partitions, buttons [1]
and [2] will flash. Press the button corresponding to the
desired partition. The [
that are already bypassed will illuminate.
4.6.1 Bypass Recall Feature
After disarming the system, the bypass entries are erased.
The Bypass Recall Feature reinstates the previous bypass
entries saved in memory. This eliminates the need to manually
re-program the bypass entries every time you arm the system.
How Do I Recall Bypass Entries?
1) Press the [
2) Enter your [
3) Press the [
Previously bypassed zones will illuminate.
4) Press the [
22 User's Guide
] button.
BYP
ACCESS CODE
] button to accept these entries.
ENTER
BYP
] button.
BYP
ACCESS CODE
] button.
BYP
] button.
ENTER
]. (see Note1)
] button will flash and any zones
]. (see Note1)
]
FORCE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1686hSpectra 1686vSpectra 1686h

Table of Contents