■ WPS(PBC) Network Setup
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to
Network Settings
→
Network
ENTERE).
2. Select WPS(PBC), press ENTERE, and
◀
then press
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it needs and connects to your network.
4. The network connection screen appears, and network setup is done.
screen.
→
Network Settings
ENTERE
again.
(MENUm
Network Settings
→
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot Connection
● The displayed image may differ depending on the
model.
English
2/6
Previous
Connect to the Access Point
Next
easily by pressing the WPS(PBC)
button. Choose this if your
Access Point supports PUSH
Cancel
▶
button Configuration(PBC).