Dirt Sensor; Operation - Kenmore 116.36622 Owner's Manual

Table of Contents

Advertisement

DIRT SENSOR
The electronic
dirt sensor
is a feature
which
will detect
particles
as they pass
through
the vacuum
cleaner.
The dirt sensor
indicator
is located
on the
front of the vacuum
cleaner
above the dust
cover.
A red light indicates
dirt is being picked
up
by the vacuum
cleaner.
OPERATION
IbWARNING
Electrical
Shock And Personal
Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the unit. Failure
to do so could result in electrical shock
or personal injury from vacuum cleaner
suddenly starting.
As you vacuum,
the red indicator
lights
will
come on and stay on as long as the sensor
detects
a high concentration
of particles
passing
through
the vacuum
cleaner.
TO CLEAN
DIRT
SENSOR
OPTICS
The dirt sensor
optics
consist
of two optic
cells located
inside the dust bag port.
Occasionally,
it may become
necessary
to
clean the two optic cells to assure
maximum
performance.
It is recommended
the optic cells be
cleaned:
• When
the red light stays on
continuously.
• When
dirt or dust adheres
to the
optic cells.
• Whenever
the dust bag is replaced.
To clean the sensor,
wipe the optic cells
with a soft, dry cloth.
Never use cleaners
or liquids
as they can help speed the
recoating
of the optic cells and make it
necessary
to clean them much sooner
than
normal.
The dirt sensor
area can be
reached
by removing
the dust bag.
Optic Cells
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.36623

Table of Contents