How To Set Up Using The Plug & Access Function - Samsung 6000 Series User Manual

How to set up using the Plug & Access function
1. Turn on the Samsung wireless router and your TV.
2. Insert a USB memory stick into the USB port in your Samsung wireless router.
Check the router's LED's to make sure it is on (Blinking → on).
3. Take the USB memory stick out of the router, and then insert it into a USB port
on your Samsung TV. The memory stick downloads the connection information.
4. Wait until the connection is automatically established.
If Plug & Access
N
◀
appears on the screen notifying you of the failure. If you want to try using
Plug & Access
adapter and then try again from Step 1. You can also choose one of the
other connection setup methods.
does not connect your TV to your AP, a pop-up window
again, reset the AP, disconnect the Samsung Wireless LAN
English
▶