Using The Bluetooth Cellular Phone; Connecting/Disconnectng/Deleting A Registered Device; Making A Call - JVC KD-R300 Instructions Manual

Connecting/disconnecting/deleting a
registered device
[[] Select "BY·PHONE" or "BT-AUDIO."
sRc6_J
[II
Select a registered device you want to
connertldisconnertldelete.
rn .
Select "CONNECT" or "DISCONNECT" to
connect/disconnect the selected device.
• Select "DELETE," then "YES" to delete the
selected device.
You can set the unit to connect the Bluetooth device
automatically when the unit is turned on. (See
II AUTO CNNCTII on page 22.)
Select "BT·PHONE."
Enter the Bluetooth menu.
Make a call or setting using the Bluetooth setting menu.
(See the following and page 22.)
When a call comes in....
The source is automatically changed to IIBT-PHONE."
• The display will flash in blue (see IIRING COLOR II
on page 24 for setting.)
When "AUTO ANSWER" is activated....
The unit answers the incoming calls automatically, see
page 22.
• When IIAUTO ANSWER" is deactivated, press any
button (except
cb/ATT/~/~)
to answer the
incoming call.
• You can adjust the microphone volume level (see
page
22).
To end the call
Hold any button
(except<!>/An/~~).
_ 12
When a text message comes in....
If the cellular phone is compatible with text message
(notified through JVC Bluetooth adapter) and "MSG
INFOII (message info) is setto IIAUTO" (see page 22), the
unit rings to inform you of the message arrival.
• IIRCV MESSAGE II (receiving message) appears on
the display and the display illuminate in blue (see
IIRING COLOR II on page 24 for setting).
• Making a call
You can make acall using the following methods.
Select IIBT-PHONE,II then follow the following steps to
makea call:
• To return to the previous menu, press BACK.
1
Enter the "DIAL" menu.