Table of Contents
Advertisement
NVR Software - SeeTec client
User interface tab
Start client in fullscreen
mode
Use multiple timelines
Use current live layer for
archive
Limit the number of
flyout windows to
Background color of
cameras
Fullscreen mode
Thumbnails
44
Note
The fullscreen mode can also be enabled / disabled by using the
ESC key.
Enable this option to start the client in
fullscreen mode.
Select whether you want to use the old or the
new player interface in Archive Mode. If this
option is selected, the new interface is used.
If this option is selected, all open cameras,
layers (also temporary layers) and maps are
displayed immediately when you change to
Archive Mode.
Limiting the number of flyout windows can
prevent excessive load on the client. If the
specified maximum is reached, the oldest
flyout window is replaced by the newest one.
If the image of a camera does not fill the layer
because of its aspect ratio, you have the option
to change the background color.
Select how the windows and layers are
displayed in full screen mode.
You can adjust the Camera frame, the Status
bar, UI elements and Tabs.
Select whether a thumbnail of the camera
should be displayed in the camera overview.
Press and hold the CTRL key and move the
mouse to the desired camera in the camera
overview.
The thumbnail of the camera can also be
displayed on the map.
The thumbnail size only applies to thumbnails
in the camera overview and on the map.
Advertisement
Table of Contents
