Configuring A Wireless Network Connection - Samsung 550 series User Manual

550 5+ series
Hide thumbs Also See for 550 series:
Table of Contents

Advertisement

After you have run the initial setup, you can configure or reconfigure the network connections through the
TV's menu.
Configuring a Wireless Network Connection
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections automatically. Most wireless networks use DHCP. If you have a Static IP
network, see the e-Manual for configuration instructions.
To configure the network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustration on page 13.
2. Turn on your TV, and then go to the Network Settings screen. (Menu
Settings)
3. Select Start. The Network function searches for available wireless networks. When done, it displays a
list of the available networks.
4. In the list of networks, move the highlight to select a network, and then select Next.
If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow the
directions on the screen.
5. Enter your network security key or WPS PIN using your remote.
Enter numbers and letters using your remote.
Enter numbers by pressing the number buttons on your remote.
To enter a letter, move the Highlight to the letter, and then select it. You can enter numbers in
the same fashion if you choose.
To display capital letters (or redisplay small letters if capital letters are displayed), select Caps or
Shift.
To display symbols and punctuation, select F. To redisplay letters, select F again.
6. When done, select Next if you have entered a security key or WPS PIN if you have entered a WPS PIN.
7. The TV checks the wireless connection. If the connection is successful, the "You are connected to the
Internet. If you have any problems using online services, please contact your Internet Service
Provider." message appears. Select Next using your remote.
For more detailed information, see "Setting up the Wireless Network" in the e-Manual.
If you want to configure the connection manually, select IP Settings on the Network Connection
screen. Set IP Mode to Manual, and then enter the IP Address, Subnet Mask, Gateway, and
DNS Server manually.
Configuring Network Connections
English - 25
Network
Network

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn51e550Pn60e550Pn64e550

Table of Contents