Installing a Wall Mount using the Wall mount adapter
VESA Wall Mount Kit Notes and Speciﬁcations
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table below.
Samsung wall mount kits contain a detailed installation manual, and all parts necessary for
assembly are provided.
Do not use screws that do not comply with VESA standard screw speciﬁcations.
Do not use screws that are longer than the standard length or do not comply with VESA standard
screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the
screws may differ depending on the wall mount speciﬁcations.
Do not fasten the screws too ﬁrmly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed
wall mount is used or the consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV on to a wall.
TV size in inches
32 - 42
46 - 65
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury from electric shock.
For more detailed information, refer to the User Manual
of the Wall Mount Kit.
Wall mount adapters are provided only with 46-inch or
VESA screw hole specs
(A * B) in millimeters
200 X 200
400 X 400
English - 23