Battery And Charging - Shoprider Greenrider ES-16 User Manual

Battery & Charging
Battery Characteristics
Model
®
PHET World PAT.
C-LiFePO
4
Dismount the Battery Pack
1. Switch off the main switch.
2. Unlock the saddle pad by the main switch key at the key switch of saddle.
3. Unplug the power cable and then pull up and hold the handle of battery pack to pull out
the battery pack from the mount/rail of the battery pack.
Mount the Battery Pack
1. Unlock the saddle pad.
2. Hold the handle of battery pack to slide into the mount/rail of battery pack.
3. Fold the handle of battery pack in place and then plug in the power cable onto the power
socket of battery pack.
1
Power Plug
Battery Pack Handle
Caution
1. All charging will be completed within 4 hours depending on the remaining charge of the
battery to be charged with the specified standard charger (3A). Do not charge the
batteries for longer than 24 hours.
2. Do not disassemble the battery pack or the warranty will be void.
3. Do not connect the terminals inside the power socket of battery pack with any foreign
objects that may cause a damage to the battery pack in short circuit or an injury to
people.
4. Use the specified standard charger (3A) only for PHET World Pat. C-LiFePO
(C-Coated Lithium Iron Phosphate Based) Battery (48V) supplied by PMMC.
5. Do not expose the battery pack to the fire, rain, water or humidity. Do not use the battery
pack in other applications than the ES-16 unit or the warranty will be void.
Reference Voltage when
Voltage (V)
fully charged (V)
48
2
53~54
Sliding
Mount/Rail
12
Weight
Capacity (Ah)
9.6
DC Power Cable
3
4
(Kg)
8
F