Event Notifications; Event List; Event Destinations - Avocent ACS V6000 User Manual

ACS v6000 Installation/Administration/User Guide
46
During the authentication phase, the console server will receive the attribute FramedFIlterID
from the RADIUS server. The user regina belongs to authorization group RADIUS_1 and
RADIUS_2. and the user special belongs to authorization group admin.
To configure group an LDAP authentication server:
On the LDAP server, edit the info attribute for the user and add the following syntax.
info: group_name=<Group1>[,<Group2>,...,<GroupN>];

Event Notifications

The virtual console server will generate notifications for a wide variety of events. You can
configure the virtual console server to direct or store those event notifications to various
destinations for immediate use or for analysis later.

Event List

The Event List screen lists virtual console server events, each of which can be configured for
SNMP Traps, Syslog, DSView 3 software, Email and SMS.
To configure Events:
1. Click Events and Logs - Events.
2. Locate the events for which you want notification sent and select the checkbox(es) next to
the event number(s).
3. Click Edit.
4. If you want an event notification sent for any configured event destination type, click its
associated Send checkbox.
5. Click Save. The Events page appears with an X in the column below the destination type
if the Send box was checked on the Events Settings screen.

Event Destinations

The virtual console server will generate notifications for a number of events. You can configure
the virtual console server to direct or store those event notifications to destinations for
immediate use or for analysis later.
To configure Event Destinations:
1. Click on Event and Logs - Event Destinations.
2. Under the Syslog heading, use the drop-down menu to select the Facility.