Time Parameter Configuration
In order to...
Restore the time zone to its default,
UTC.
Configure the time zone for the
system
Configure the time protocol for use
in the system
Enable or disable the time client
Configure the NTP server address
Display the current time
Display the time status and
parameters
Display the current time zone offset
Get the time from the time server
Feature License Configuration
Certain features in the Avaya P460 are activated by "Feature Licenses." A sample
activation procedure for these features is described below:
Feature Activation
In order to benefit from the P460 routing capabilities, you need to purchase an
Avaya L480L3-License Routing License Key Certificate (catalog number 700255060)
for each P460 chassis .
Each Certificate is specific for:
•
The module type.
•
The required feature.
•
The number of devices.
After you purchase a Feature Licence Key Certificate, you must obtain and activate
a Feature License Key.
Avaya P460 Installation and Maintenance Guide
Chapter 11
Basic Switch Configuration
Use the following command...
clear timezone
set timezone
set time protocol
set time client
set time server
show time
show time parameters
show timezone
get time
65