Chapter 10
Configuration Defaults
Introduction
This chapter defines the default parameters for the P460 switch.
Default System Parameters
Table 10.1
Parameter
All IP addresses
Default gateway
CLI timeout
User name
Password
PPP interface
Out-of-band interface
In-band interface
In-band ARP Tx interval
Out-of-band ARP Tx interval
VLANs
Spanning Tree
Bridge priority for Spanning Tree
NTP server IP address
Time zone offset
Timezone
Read-only SNMP community string
Avaya P460 Installation and Maintenance Guide
Default System Parameters
Default Value
N/A (0.0.0.0)
N/A (0.0.0.0)
15 minutes
root
root
Disabled
Disabled
Disabled
5 seconds
5 seconds
1 on all ports
Enabled
32,768
N/A
0 hours
GMT
public
61