Download Print this page

Canon INDEX 4602 Installation Manual

Index 4602 ip telephone.
Hide thumbs

Advertisement

INDeX 4602 IP Telephone
Installation Manual
38DHB0002UKCQ – Issue 2 (11/06/2003)

Advertisement

   Related Manuals for Canon INDEX 4602

   Summary of Contents for Canon INDEX 4602

  • Page 1: Installation Manual

    INDeX 4602 IP Telephone Installation Manual 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 2: Table Of Contents

    Dynamic Address Process..................... 6 Static Addressing Pre-Installation Checklist ................8 Static Addressing Installation 3....................8 Creating the DHCP Scope:................. 12 Adding the 4602 IP Telephone Option (176): ..................14 Page 2 INDeX 4602 IP Telephone Installation Manual Contents 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 3: Introduction

    VoIP calls. Windows 98/ME/NT WS/2000 Pro. • The Operating System can be either Windows NT, Windows 98 or Windows 2000 Professional. INDeX 4602 IP Telephone Installation Manual Introduction - Page 3 38DHB0002UKCQ – Issue 2 (11/06/2003) Use of this Manual...

  • Page 4: Installation Procedure

    Page 4 - INDeX Setup Installation Procedure Installation Procedure Prior to installation of the INDeX 4602 IP Telephone on a user's networked PC, ensure that both the INDeX and IPNC have been configured as follows: INDeX Setup Log on to the INDeX and open the Administration menu and perform the following: 1.

  • Page 5: Installation Requirements

    4602 IP Telephone The PC's network configuration does not need to be altered from that which it previously used for direct connection to the LAN. INDeX 4602 IP Telephone Installation Manual Installation Procedure - Page 5 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 6: Dynamic Address Process

    4. Manager and TFTPLog Leave Manager running. It is also useful to have Manager's TFTP Log visible (select View | TFTPLog). This will display the progress of file requests. Page 6 - IPNC Setup INDeX 4602 IP Telephone Installation Manual Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 7

    G.729(a) 8K CS-ACELP. • In the list of users, a new user will have been created matching the extension number entered above. INDeX 4602 IP Telephone Installation Manual Installation Procedure - Page 7 38DHB0002UKCQ – Issue 2 (11/06/2003) IPNC Setup...

  • Page 8: Static Addressing Pre-installation Checklist

    2. Enter the IP address for the telephone followed by the # button. The following message is displayed: CallsSv=nnn.nnn.nnn.nnn New=_ where “nnn.nnn.nnn.nnn” is the value of the call server/gatekeeper IP address. Page 8 - IPNC Setup INDeX 4602 IP Telephone Installation Manual Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 9

    One of the following texts is displayed left-justified at the top of the display, depending on the current status of 802.1Q: If 802.1Q is off: 802.1Q=off 1=on #=OK If 802.1Q is on: 802.1Q=on 0=off #=OK INDeX 4602 IP Telephone Installation Manual Installation Procedure - Page 9 38DHB0002UKCQ – Issue 2 (11/06/2003) IPNC Setup...

  • Page 10

    If a new boot program is downloaded from the TFTP server after you enter static addressing information, you will need to re-enter your static addressing information. Page 10 - IPNC Setup INDeX 4602 IP Telephone Installation Manual Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 11

    If you press the # button, the following text is displayed: New values? Being saved The new values are saved, and the user interface is restored to its previous state. INDeX 4602 IP Telephone Installation Manual Installation Procedure - Page 11 38DHB0002UKCQ – Issue 2 (11/06/2003) IPNC Setup...

  • Page 12: Creating The Dhcp Scope

    Options in the IP Office should be disabled. This is only a recommendation. You can also accomplish this by leaving available addresses outside of the scopes range. Page 12 INDeX 4602 IP Telephone Installation Manual Contents 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 13

    Select No and click Next 13. Click Finish to the Wizard The new scope will now be listed and the status as Inactive. INDeX 4602 IP Telephone Installation Manual Page 13 38DHB0002UKCQ – Issue 2 (11/06/2003) Creating the DHCP Scope:...

  • Page 14: Adding The 4602 Ip Telephone Option (176)

    3. Select Add and, from the Data type pull down menu, select String: 4. Enter the following information: Name: 46xxOptions Data type: String Code: Description: IP Phone settings Click OK when finished. Page 14 INDeX 4602 IP Telephone Installation Manual Creating the DHCP Scope: 38DHB0002UKCQ – Issue 2 (11/06/2003)

  • Page 15

    The scope can be manually activated by right clicking on the scope and selecting Activate. The activation is immediate. Likewise you can deactivate by selecting deactivate INDeX 4602 IP Telephone Installation Manual Page 15 38DHB0002UKCQ – Issue 2 (11/06/2003) Creating the DHCP Scope:...

  • Page 16

    All rights reserved. Avaya Sterling Court 15 - 21 Mundells Welwyn Garden City Hertfordshire AL7 1LZ England Tel: +44 (0) 1707 392200 Fax: +44 (0) 1707 376933 Email: globalsme@avaya.com Web: http://www.avaya.com. INDeX 4602 IP Telephone Installation Manual 38DHB0002UKCQ – Issue 2 (11/06/2003)

Comments to this Manuals

Symbols: 0
Latest comments: