Ospf Cli Commands - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 3 Features

OSPF CLI Commands

168 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Enable OSPF protocol
Configure the area ID of the
router
Configure router identity
Configure a passive ospf
interface
Redistribute routing information
from other protocols into OSPF
Configure the delay between
runs of OSPF's SPF calculation
Configure interface metric
Specify the time interval
between hellos the router sends
Configure the interval before
declaring the neighbor as dead.
Configure interface priority used
in DR election
Configure the interface
authentication password
Display general information
about OSPF routing
Display the OSPF-related
interface information
Display OSPF neighbor
information on a per-interface
basis
Display lists of information
related to the OSPF database
for a specific router
Configure an interface as
passive
Use the following command...
router ospf
area
ip ospf router-id
passive-interface
redistribute
timers spf
ip ospf cost
ip ospf hello-interval
ip ospf dead-interval
ip ospf priority
ip ospf authentication-key
show ip ospf
show ip ospf interface
show ip ospf neighbor
show ip ospf database
passive-interface