CHARGING THE GLASSES
Connect the USB port located under the power button on the glasses to the USB
port of the TV or PC using the supplied 8-pin mini USB cable as shown by the ﬁgure.
Charge the glasses until the LED is green.
The glasses will fully charge in about 2 hours.
While charging: The LED is red.
When charging is complete: The LED is green.
When the battery is discharged: The LED blinks for 1 minute and turns off automatically.
Q. The glasses do not work.
Q. The LED blinks continuously.
Q. I charged the glasses with
the 8-pin mini USB cable,
but it is not charged.
If you use a USB cable other the one (8-pin mini USB) supplied with the product, the
product may be damaged.
A. The battery (Lithium Polymer) may be discharged, charge the
battery with the 8-pin mini USB cable.
A. Check that the distance between the TV and your 3D glasses
is less than 23 ft (7 m) in a straight line.
A. Check the 3D function settings of your TV.
A. This occurs when the battery (Lithium Polymer) is discharged.
In this case, charge the battery with the supplied 8-pin mini
A. Check if the 8-pin mini USB cable is properly connected to