Operation; Using The Dryer - Bosch WTZ11340UC Use And Care Manual

Operation

Using the dryer

1. Open the door.
2. Check lint filter.
The filter should be cleaned
after and before every drying
process. Cleaning the filter
reduces the drying time and
saves energy.
3. a) Rotate program selector to
the desired program.
Select the program which
corresponds to the laundry in
the dryer from the program
selection table (see page 19).
or
20
b) Rotate program selector to
Time dry/.... min.".
4. If required, select Option" by
pressing the button.
The "Options" are explained on
page 18.
5. Place laundry in the empty
drum. Put each piece of laundry
into the machine separately.
For best results the laundry to
be dried must be sorted
according to type of laundry
and desired degree of drying.
For further information see
page 17.
Observe drying symbols of the
i
laundry manufacturer.
Ensure that there is only
laundry in the drum. Check that
all items are completely in the
drum.
6. Close the door.
If the door has not been closed
i
properly, the dryer will not start.
7. Press the Start button. The On
indicator light illuminates.
The program starts with an
i
acoustic signal (if set).
If a standard program has been
selected, the indicator lights will
light up to indicate the progress
of the program sequence.
At program end, an acoustic
i
signal is emitted (if set) and the
LED wrinkle block/end"
illuminates.
Anti crease function
i
When the drying process is
complete (program or selected
time program ended), the drum
rotates at specific intervals for
1 hour. This prevents the
laundry from creasing. The
laundry remains loose and fluffy
until it is removed.
The laundry should be removed
before this time has elapsed.