Pre-Assembly; Assembly Step - Horizon Fitness T72 User Manual

DONOTCUTSTRAPS UNTILSTEPI-E!*
Disassemble box and remove the
cardboard packaging that is not beneaththe treadmill. Do not attempt to lift the
treadmill at this time. Remove plastic wrap from console masts.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONEbolt. NOTE:A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
iI _ iii
i!l
I H_RDW_R£B_ _ 0011[£1115: i
-_ BOLT ( A)
53.5mm
Qty: 2
\
LEFT SIDELINKAGE ARM
A
B
D
E
Open HARDWARE BAGI.
Lift LEFTCONSOLE MAST into
upright position. Besure to hold
the consolemast firmly, as it
will not stay in the upright
positionon it's own.
MoveLEFT SIDELINKAGE A RM
into position. InsertBOLT (,4)
and tighten.
Repeaton the right side.
Nowcut the banding straps and
removeremainingpackaging
material *
NOTE: i i the StraPs have been removed before !ompleting Step1_D and th e linkage arms CanIoi be aligned,
i !fert°theTROIBLESHOOTING secti°n#age 32) in order to !sti! the treadmillto !! pmper position: I
F
H
Lift the RUNNING DECK until
lock latch on side of treadmill
is fully engaged.
Remove CONSOLE from box
and place out of the way,
Lower the treadmill RUNNING
DECK from the folded position
by steppingon LOCK LATCH on
lowerright side.