Configuring The Marvell Bios Setup To Set An Optional Hot Spare Hard Disk Drive; Configuring The Marvell Bios Setup To Delete An Optional Hot Spare Hard Disk Drive; Configuring The Marvell Bios Setup To Delete An Array - Lenovo ThinkStation Hardware Maintenance Manual

10. Select Next and press Enter. When prompted, press Y to complete the array
Configuring the Marvell BIOS Setup to set an optional hot
spare hard disk drive
To configure the Marvell BIOS Setup to set an optional hot spare hard disk drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
3. From the RAID Config menu, select Spare Management.
4. Use the arrow keys to select the hard disk drive you want to set as an optional
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to set the optional hot spare hard disk drive.
Configuring the Marvell BIOS Setup to delete an optional hot
spare hard disk drive
To configure the Marvell BIOS Setup to delete an optional hot spare hard disk
drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
3. From the RAID Config menu, select Spare Management.
4. Use the arrow keys to select the optional hot spare hard disk drive you want to
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to delete the optional hot spare hard disk drive.

Configuring the Marvell BIOS Setup to delete an array

To configure the Marvell BIOS Setup to delete an array:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Config
3. From the RAID Config menu, select Delete array.
4. Use the arrow keys and the Enter key to select the array you want to delete
5. Use the arrow keys to select Next and press Enter.
58
Hardware Maintenance Manual
6. From the Create array menu, select RAID level and press Enter.
Note: Only the valid RAID levels will be active.
7. Select the SAS RAID level you want (RAID 0, RAID 1, or RAID 5) and press
Enter.
8. From the Stripe size menu, you can change the stripe size or keep it as
default.
9. Type a proper array name in the Array name field.
creation and RAID configuration.
BIOS Setup.
and press Enter. The RAID Config menu opens.
hot spare hard disk drive.
BIOS Setup.
and press Enter. The RAID Config menu opens.
delete.
BIOS Setup.
and press Enter. The RAID Config menu opens.
from the list.