Ids For Hot-Swap Hard Disk Drives; Installing An Optional Dvd Drive - IBM System x3250 M3 Type 4251 Installation And User Manual

If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 53.

IDs for hot-swap hard disk drives

The hot-swap-drive ID that is assigned to each drive is printed on the front of the
server. The following illustration shows the location of the IDs of the hard disk
drives. The ID numbers and the drive bay numbers are the same.

Installing an optional DVD drive

Note: If you are installing a drive that contains a laser, observe the following safety
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
38
IBM System x3250 M3 Types 4251, 4252, and 4261: Installation and User's Guide
precaution.
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
3.5-inch hard disk drive IDs
2.5-inch hard disk drive IDs