Lenovo ThinkCentre Hardware Maintenance Manual page 60
Machine types: 3026, 3029, 3039, 3054, 3137, 3139, 3149, 3219, 3245, 3246, 3245, 3282, 3319, 3349, 3394, 3421, 3491, 3544, 3627, 3652, 3699, 3769, 3878, 3934, 4972, 4992, 5132, 5206, 5261, 5267, 5297, 5325, 5384, 5391, 5450, 5472, 5474, 5485, 5498, 5536,
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Diagnostic Error Code
035-198-XXX RAID interface test aborted
035-199-XXX RAID interface test failed, cause unknown
071-000-XXX Audio port Interface Test Passed
071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port
error
071-03X-XXX Audio port failure
071-04X-XXX Audio port failure
071-195-XXX Audio port Test aborted by user
071-196-XXX Audio port test halt, error threshold
exceeded
071-197-XXX Audio port test warning
071-198-XXX Audio port test aborted
071-199-XXX Audio port test failed, cause unknown
071-25X-XXX Audio port failure
080-000-XXX Game Port interface Test Passed
080-XXX-XXX Game Port interface Error
52
ThinkCentre Hardware Maintenance Manual
FRU/Action
1. If a component is called out, make sure it is
connected and/or enabled. See "" on page .
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 366.
3. Go to "Undetermined problems" on page 60.
1. See "Undetermined problems" on page 60.
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 366.
3. Replace component under function test.
No action
1. Run the Setup Utility program.
2. Flash the system. See "Updating (flashing) BIOS
from a disc" on page 366.
3. System board
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
1. Run the Setup Utility program.
2. Audio card, if installed
3. System board
Information only Restart the test, if necessary.
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
1. Make sure the component that is called out is
connected and/or enabled. See "" on page .
2. Re-run the test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
1. If a component is called out, make sure it is
connected and/or enabled. See "" on page .
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 366.
3. Go to "Undetermined problems" on page 60.
1. See "Undetermined problems" on page 60.
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 366.
3. Replace component under function test.
1. Speakers
2. Audio card, if installed
3. System board
No action
1. Remove the game port device and re-test the system.
Advertisement
Table of Contents
