Lenovo ThinkCentre Hardware Maintenance Manual page 71

Machine types: 1729, 1731, 1732, 1734, 1736, 1737, 7074, 7075, 7077, 7078, 7556, and 7559
Hide thumbs Also See for ThinkCentre:
Table of Contents

Advertisement

Diagnostic Error Code
014-197-XXX Parallel port test warning
014-198-XXX Parallel port test aborted
014-199-XXX Parallel port test failed, cause unknown
014-2XX-XXX 014-3XX-XXX Parallel port failure
015-000-XXX USB port Interface Test Passed
015-001-XXX USB port Presence
015-002-XXX USB port Timeout
015-015-XXX USB port External Loopback failure
015-027-XXX USB port Configuration/Setup error
015-032-XXX USB port Device Controller failure
015-034-XXX USB port buffer allocation failure
015-035-XXX USB port Reset condition detected
015-036-XXX USB port Register error
015-040-XXX USB port IRQ failure
015-195-XXX USB port Test aborted by user
FRU/Action
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 "Using
the Setup Utility program" on page 53.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
1. If a component is called out, make sure it is
connected and/or enabled.
2. Flash the system and re-test. See "Flash update
procedures" on page 185.
3. Go to "Undetermined problems" on page 78.
1. Go to "Undetermined problems" on page 78.
2. Flash the system and re-test. See "Flash update
procedures" on page 185.
3. Replace component under function test.
1. External parallel device
2. System board
No action
1. Remove USB device(s) and re-test.
2. System board
1. Remove USB device(s) and re-test.
2. System board
1. Remove USB device(s) and re-test.
2. System board
1. Flash the system. See "Flash update procedures"
on page 185.
2. System board
System board
1. Reboot the system
2. Flash the system and re-test. See "Flash update
procedures" on page 185.
3. Run memory test.
4. System board
1. Remove USB device(s) and re-test.
2. System board
System board
1. Run the Setup Utility program and check for
conflicts.
2. Flash the system. See "Flash update procedures"
on page 185.
3. System board
Information only Restart the test, if necessary.
Chapter 7
.
Symptom-to-FRU Index
65

Advertisement

Table of Contents
loading

Table of Contents