Altec Lansing M202 User Manual page 16

Troubleshooting
Symptom Possible Problem
iPhone or iPod is not installed properly.
Your iPhone or iPod software is too old.
iPhone or iPod
doesn't respond
to the speaker iPhone or iPod is locked up.
system or remote
Using 1st- or 2nd- generation iPod, iPod shuffle or
other devices.
The wrong adapter for iPhone or iPod is being used.
iPhone or iPod is not installed properly.
iPhone or iPod is locked up.
iPhone or iPod
didn't charge
AC adapter isn't plugged into a wall outlet, or the
connector is not plugged into the power supply jack
on the back of the speaker system.
The wrong adapter for iPhone or iPod is being used.
14
Solution
Remove your iPhone or iPod from the dock and check for obstructions
on the connectors in the dock and on your iPhone or iPod. Then reseat it
in the dock.
Upgrade software on your iPhone or iPod. For details visit
www.apple.com/ipod/download.
Please make sure your iPhone or iPod is working properly before docking
into the unit. Please refer to your iPhone or iPod manual for details.
Your speaker system cannot control those iPod models or other devices.
Make sure the adapter is the proper one for your iPhone or iPod.
Remove your iPhone or iPod from the dock and check for obstructions
on the connectors in the dock and on your iPhone or iPod. Then reseat it
in the dock.
Please make sure your iPhone or iPod is working properly before docking
into the unit. Please refer to your iPhone or iPod manual for details.
Plug the AC adapter into a wall outlet and plug the connector into the supply
jack on the speaker system.
Make sure the adapter is the proper one for your iPhone or iPod.