Cycles; Options - Kenmore 592-89107 Use & Care Manual

Models : 592-89107*, 592-89117*, 592-89108*, 592-89118*,
592-89102*
Normal
Use this cycle to dry loads such as cotton, underwear, and linen.
Heavy Duty
Use this cycle to get high heat for heavy fabrics such as jeans,
corduroys, or work clothes.
Perm Press
Dry wrinkle-free cottons, synthetic fabrics, knits, and permanent
press fabrics automatically. The cycle minimizes wrinkling by
providing a longer unheated cool-down period at the end of the
cycle.
Delicates
The Delicates cycle is designed to dry heat-sensitive items at a
low drying temperature.
Timed Dry
Time Dry allows you to select the desired cycle time in minutes.
Turn the Cycle Selector dial to Time Dry, then press the Adjust
Time up arrow to set the drying time.
Press the arrow repeatedly to scroll through the time settings.
Wrinkle Release
The Wrinkle Release cycle will release wrinkles from items that
are clean, dry, and only slightly wrinkled, such as clothes from
a crowded closet, suitcase or items that have been in the dryer
too long after the cycle has ended. Wrinkle Release can be used
with any temperature selection.
Air Fluff
The Air Fluff cycle tumbles the load in room temperature air.
Kenmore_Dryer-Good-02687A-01_EN.indd 15

Cycles

Options

Digital Graphic Display
The display window shows the estimated time remaining in the
cycle after the Start/Pause button is pressed. The estimated
time remaining may fluctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is
complete.
When your Dryer is in the cool-down phase, the Cooling light will
illuminate.
When your Dryer is in the wrinkle prevent phase, the Wrinkle
Prevent light will illuminate.
When the cycle is complete, "END" will appear in the display
panel until the Dryer door is opened or the Power key is pushed.
If your Dryer is paused during a cycle, the indicator lights will
blink until the Start/Pause button is pressed.
Dry Level Selection Button
To select the dry level in the Normal, Heavy Duty, or other
Sensor Dry cycles, press the Dry Level button. An indicator light
will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger
or bulkier loads may require the More Dry setting for complete
dryness.
The Less Dry setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the cycle.
Use for items that lay flat or hang to dry.
Temp Selection Button
To select the correct temperature for the load, press the Temp
button. An indicator light will illuminate next to the desired
temperature. Press the button repeatedly to scroll through the
settings.
■ High - For sturdy cottons or those labeled Tumble Dry.
■ Medium - For permanent press, synthetics, lightweight
cottons, or items labeled Tumble Dry Medium.
■ Low - For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
■ Extra Low - Provides the lowest heated dry temperature
possible.
15
2009-07-02 ¿ÀÈÄ 3:21:25