Table of Contents
Advertisement
1. ENTERING SERVICE MODE
1) Press MUTE button twice on
Remote Control.
MUTE
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on Remote Control.
Service mode
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Test signal selection :
Selection of the adjustment items :
Change of the data value :
Adjustment menu mode ON/OFF :
Initialization of the memory :
Reset the count of operating protect circuit to "00" : CALL + Channel button on TV (
"RCUT" selection :
"GCUT" selection :
"BCUT" selection :
"CNTX" selection :
"COLC" selection :
"UVTT" selection :
Automatic A/D Adjustment(PC, Component) : 7 button
Self diagnostic display ON/OFF :
CAUTION : Never try to perform initialization unless you have changed the memory IC.
SERVICE MODE
2) Press MUTE button again and
keep pressing.
Adjustment mode
Press
Press
TV/VIDEO button (on Remote)
Channel
/
(on TV or Remote)
Volume
/
(on TV) or
MENU button (on Remote)
CALL + Channel button on TV (
1 button
2 button
3 button
4 button
5 button
-----Color thickness correction
6 button
9 button
- 7 -
3) While pressing the MUTE button,
press MENU button on TV set.
(Service mode display)
/
(on Remote)
)
)
note: Displayed differently as shown below, depending
on the setting of the receiving color system.
COLP (PAL)
COLC (NTSC)
COLS (SECAM)
Hide quick links:
Advertisement
Table of Contents
