Lenovo ThinkCentre Hardware Maintenance Manual page 60

Diagnostic Error Code
035-198-XXX RAID interface test aborted
035-199-XXX RAID interface test failed, cause unknown
071-000-XXX Audio port Interface Test Passed
071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port
error
071-03X-XXX Audio port failure
071-04X-XXX Audio port failure
071-195-XXX Audio port Test aborted by user
071-196-XXX Audio port test halt, error threshold
exceeded
071-197-XXX Audio port test warning
071-198-XXX Audio port test aborted
071-199-XXX Audio port test failed, cause unknown
54
ThinkCentre Hardware Maintenance Manual
FRU/Action
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 37
2. Flash the system and re-test. See "Flash update
procedures" on page 175
3. Go to "Undetermined problems" on page 63
1. See "Undetermined problems" on page 63
2. Flash the system and re-test. See "Flash update
procedures" on page 175
3. Replace component under function test
No action
1. Run Setup
2. Flash the system. See "Flash update procedures"
on page 175
3. System board
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
1. Run Setup
2. Audio card, if installed
3. System board
Information only Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called out
is connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 37
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6
"Diagnostics, Test and Recovery Information" on
page 37
2. Flash the system and re-test. See "Flash update
procedures" on page 175
3. Go to "Undetermined problems" on page 63
1. See "Undetermined problems" on page 63
2. Flash the system and re-test. See "Flash update
procedures" on page 175
3. Replace component under function test