Improving Copy Quality; Sorting Copies Using The Adf (For Dcp-7065Dn); Enlarging Or Reducing The Image Copied - Brother HL-2130 User Manual

Improving copy quality

You can choose from a range of quality
settings. The default setting is Auto.

Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.

Text
Suitable for documents containing mainly
text.

Photo
Better copy quality for photographs.

Graph
Suitable for copying receipts.
To temporarily change the quality setting,
follow the steps below:
a
Load your document.
b
Press a or b to enter the number of
copies you want.
c
Press Options.
Press a or b to choose Quality.
Press OK.
d
Press a or b to choose Auto, Text,
Photo or Graph.
Press OK.
e
Press Start.
To change the default setting, follow the
steps below:
a
Press Menu.
b
Press a or b to choose 2.Copy.
Press OK.
c
Press a or b to choose 1.Quality.
Press OK.
d
Press a or b to choose the copy quality.
Press OK.
e
Press Stop/Exit.
Sorting copies using the ADF
2
(For DCP-7065DN)
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Load your document in the ADF.
b
Press a or b to enter the number of
copies you want.
c
Press Options.
Press a or b to choose Stack/Sort.
Press OK.
d
Press a or b to choose Sort.
Press OK.
e
Press Start.
Enlarging or reducing the
image copied
You can choose the enlargement or reduction
ratios.
To enlarge or reduce the next copy follow the
instructions below:
a
Load your document.
b
Press a or b to enter the number of
copies you want.
c
Press Options.
d
Press a or b to choose
Enlarge/Reduce, then press OK.
e
Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose
Custom(25-400%).
Press OK.
Making copies
2
2
2
9