Sony DVP-S300 Service Manual page 5

Hide thumbs Also See for DVP-S300:

Table of Contents

Original version

2. NOTE ON REMOVE THE CASE

1) Remove six tapping screws. (See Fig. 1)

2) Open the side of case. (See Fig. 1)

3) Remove the case as lift straight. (See Fig. 1)

Two tapping screws

Case

Two tapping screws

Fig. 1

3. DISK REMOVAL PROCEDURE

(at POWER OFF)

1) Insert a cross-tip screwdriver into a hole at the bottom, and

rotate the cam gear 1 in direction A. (See Fig. 2)

Note: To prevent a damege of cam gear, rotate it in direction

A by 1/4 turn.

2) Draw out the tray 2 in direction B by hand, and remove a

disk. (See Fig. 2)

1 Cam gear

2 Tray

Hole

Fig. 2

4. HOW TO SERVICE MB-78 BOARD

1) Remove the case from the set. (Refer to 2-1)

2) Remove the cover (upper). (Refer to 2-3)

3) Set the MB-78 board as shown in Fig. 3.

Note: Do not disconnect wiring.

MB-78 board

Fig. 3

Page 5

Table of Contents

Dvp-s305 Dvp-s315