Sony KP-57XBR10W Service Manual page 53

SUB DEFLECTION ADJUSTMENT ITEM
Adjustment O : Yes – : No
Display Adjustment item
CENT CENT
SKEW SKEW
SIZE SIZE
LIN LIN
KEY KEY
PIN PIN
[GREEN REGISTRATION ADJUSTMENT]
<GREEN CENTER, SIZE>
1. Select GRN CENT or GRN SIZE with the 1and 4 keys on
the remote commander.
2. Adjust the center of crosshatch line goes the middle vertically
and horizontally (GRN CENT) and set the size correctly (GRN
SIZE) with the joystick on the remote commander.
GRN 000
CENT
<GREEN SKEW>
1. Select GRN SKEW with the 1 and 4 keys on the remote
commander.
2. Adjust the crosshatch line goes straight vertically and horizon-
tally with the joystick on the remote commander.
GRN 000
SKEW
Adjustment type
G R B
H/V H/V H/V
O/O O/O O/O
O/O O/O O/O
O/O O/O O/O
–/– O/– O/–
–/– –/O –/O
–/O –/O –/O
000
: Middle
000
<GREEN PINCUSHION>
1. Select GRN PIN with the 1 and 4 keys on the remote
commander.
2. Adjust the crosshatch line goes straight horizontally with the
joystick on the remote commander.
GRN
XXXX
PIN
Note : These are required when either severe miss-adjustment or
data loss occurred.
<FINE ADJUSTMENT>
1. Press 9 key on the remote commander to shift to the fine
adjustment mode.
The green cursor (in the GRN mode) appears on the center of
the screen.
2. Use the 1and 4 keys or the joystick on the remote com-
mander, move the cursor (see below) everywhere you want to
adjust and adjust with the joystic keys on the remote com-
mander.
Marker movement by the 1 and 4 keys:
Press once the joystick the cursor turns green to white.
Then you can move the cursor up and down left and right every
where you want.
– 53 –
KP-57XBR10W/65XBR10W
RM-Y907
000
RM-Y907