Cleaner Descriptions; How To Use - Hoover Elite Rewind U5509900 Owner's Manual

1-8

2. How to use

Cleaner description
1
2-1
2
12
11
Polarized plug
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician to install the proper
outlet. Do not change the plug in
any way.
4
Wrap hose over hook (I).
Push hose end (J) firmly onto tube
I
(K) as shown.
J
K
3
4
5
6
7
20
8
9
19
10
2-2
A
ON-OFF pedal
Grasp end of plug (A) and pull to
desired cord length. Plug cord into
electrical outlet.
To turn cleaner ON, step on ON/OFF
pedal (B) once.
To turn cleaner OFF, step on pedal
again.
1. Handle grip
2. Powered hand tool
3. Dirt cup release button
4. Carrying handle/Dirt
13
cup handle
5. Air flow indicator
14
6. Dirt cup assembly
7. Long lasting HEPA filter
15
8. Headlight
9. Nozzle control knob:
16
turn knob to correct setting
for height of carpet being
cleaned.
17 10. Furniture nozzle: helps
prevent cleaner from mark-
ing furniture.
11. Cord reel
18
12. Cord rewind button:
press button to rewind cord
for storage. Hold plug until
cord is rewound.
13. Cord hook
14. Hose
15. Hose holder
16. Combination tool
17. Crevice wand
18. Hose handle
19. ON/OFF pedal
20. Handle release pedal:
step on pedal to lower handle
to operating or low positions.
Operate cleaner only at
voltage specified on data
plate on back of cleaner.
This cleaner is intended for
household use.
2-3
B
Cord rewind
Grasp the end of the plug and pull
to release cord from cord reel. After
desired cord length is reached, the
cord will lock into position.
To return cord for storage, hold plug
and press on button (C) at top of
cord reel. To prevent cord from
whipping, hold plug until cord is
rewound.
C