Maintenance; Convenience Outlet; Oven Window; Oven Door - Maytag T2 User Manual

Radiant electric range t2
Hide thumbs Also See for T2:
Table of Contents

Advertisement

Available languages

Available languages

Melted Sugar or Plastic – Immedi-
ately turn element to LOW and scrape
from hot surface to a cool area. Then
turn element OFF and cool. Clean res-
idue with razor blade scraper and
Cooktop Cleaning Creme*.
METAL FINISHES
Wash with soap and water, a glass
cleaner, or mild liquid detergent.
To prevent scratching or dulling of the
finish, do not use mildly abrasive,
abrasive, harsh or caustic cleaners
such as oven cleaners.
OVEN INTERIORS
Follow instructions on pages 13-14 for
Self-Cleaning Oven.
OVEN RACKS
Clean with soapy water.
Remove stubborn soil with cleansing
powder or soap-filled scouring pad.
Rinse and dry.
Racks will permanently discolor and
may not slide smoothly if left in the
oven during a self-clean operation. If
this occurs, wipe the rack and
embossed rack supports with a small
amount of vegetable oil to restore
ease of movement, then wipe off
excess oil.
PLASTIC FINISHES
TRIM & END CAPS
When cool, clean with soap and water,
rinse and dry.
Use a glass cleaner and a soft cloth.
NOTE: Never use oven cleaners, abra-
sive or caustic liquid or powdered cleans-
ers on plastic finishes. These cleaning
agents will scratch or mar finish.
NOTE: To prevent staining or discolora-
tion, wipe up fat, grease or acid (tomato,
lemon, vinegar, milk, fruit juice, mari-
nade) immediately with a dry paper towel.

MAINTENANCE

OVEN DOOR

CAUTION:
Do not place excessive weight on
or stand on an open oven door.
This could cause the range to tip
over, break the door, or injure the
user.
Do not attempt to open or close
door or operate oven until door is
properly replaced.
Never place fingers between hinge
and front oven frame. Hinge arms
are spring mounted. If accidentally
hit, the hinge will slam shut against
oven frame and could injure your
fingers.
TO REMOVE:
1. When cool, open the oven door to the
broil stop position (opened about four
inches).
2. Grasp door at each side. Do not use
the door handle to lift door.
3. Lift up even-
ly until door
clears hinge
arms.
TO REPLACE:
1. Grasp door
at each side.
2. Align slots in the door with the hinge
arms on the range.
3. Slide the door down onto the hinge
arms until the door is completely seat-
ed on the hinges. Push down on the
top corners of the door to completely
seat door on hinges. Door should not
appear crooked.
NOTE: The oven door on a new range
may feel "spongy" when it is closed. This
is normal and will decrease with use.

OVEN WINDOW

TO PROTECT THE OVEN DOOR
WINDOW:
1. Do not use abrasive cleaning agents
such as steel wool scouring pads or
powdered cleansers as they may
scratch the glass.
2. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
3. Do not close the oven door until the
oven racks are in place.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing
an increased risk of breakage at a later
date.

CONVENIENCE OUTLET

(Canadian Models Only)
The convenience outlet is located on the
lower left side of the backguard.
Be sure appliance cords do not rest on or
near the surface element. If the surface
element is turned on, the cord and outlet
will be damaged.
The convenience outlet circuit breaker
may trip if the small appliance plugged
into it exceeds 10 amps. To reset the cir-
cuit breaker, press the switch located on
the lower edge of the backguard.
CIRCUIT BREAKER SWITCH
16

Advertisement

Table of Contents
loading

Table of Contents