Fujitsu Plasmavision PDS4229W-B Service Manual page 35

6.Removing the PDP Unit (2 of 3)
∗ View after the Front Case, Panel
Unit and PCBs removed.
5. Remove the insulation sheet and the
11 circled screws.
6. Disconnect connectors CN201,
CN351, CN352, CN501 and AC Inlet
3 pins.
7. Remove the Base Frame together
with the other parts.
8. Remove the PFC PCB.
∗ Refer to "Removing the PFC PCB"
on page 32.
9. Remove the shield plate under the
PFC PCB and Main Power PCB.
∗ Refer to "Removing the Main Power
PCB" on page 33.
– 37 –