Using The Hose And Tools Select Tool; Attach Hose And Tool; Using The Tools - Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit Owner's Manual

Using the tools

Floor swivel tool
34
• Swivel head
• 2 rows of brushes
• Use to clean small, tight areas

Attach hose and tool

Unplug cleaner from electrical outlet.
How to connect hose
Open hose door (A) on side of cleaner.
35
Align hose connector (B) with hose and solution ports (C).
Insert hose connector (B) until it snaps in place.
To disconnect hose: Squeeze the hook (D) on bottom of hose
connector. Remove hose from port.
Close hose door tightly.
How to connect telescoping wand
Slide wand (A) onto hose end (B). Snap wand over tab
36
(C) on hose.
To extend telescoping wand, pull button (D) toward
you and pull wand away from you to the desired length. The full
extension of the wand is indicated by a 'MAX' line. It is recom-
mended you do not extend the wand past this line.
To remove wand: Push forward and up on latch (E).
Slide wand off hose.
How to connect tool
Tool may be attached directly to the hose or onto the
telescoping wand.
Slide tool onto hose or wand. Snap tool over tab (A)
37
on hose or wand.
To remove tool: Push forward and up on latch (B).
Slide tool off hose or wand.
14
34
35
A
36
E
A
D
A
37
B
B
C
D
C
B
B
A