Specifi Cations - Sony KLV-26M400A Service Manual

Power Requirements 110V -220V CA, 50/60 Hz
Power Consumption (W)
In Use (Max) 135W (KLV-26M400A Only)
155W (KLV-32M400A Only)
190W (KLV-37M400A Only)
245W (KLV-40M400A Only)
In Standby Less than 1W
VIDEO (IN) 1/2
S Video (4-Pin Mini DIN (VIDEO 1 Only)
Video
Audio
COMPONENT IN 1/2
YP
AUDIO
KLV-26M400A/32M400A/37M400A/40M400A
SPECIFICATIONS
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
1.0 Vp-p, 75 ohms unbalanced, sync negative
500 mVrms (100% modulation)
Impedance:47 kilohms
P (Component Video)
B R
Y:1.0 Vp-p, 75 ohms unbalanced, sync negative
P :0.7 Vp-p, 75 ohms
B
P :0.7 Vp-p, 75 ohms
R
Signal format: 480i, 480p, 720p, 1080i, 1080p
500 mVrms (100% modulation)
Impedance: 47 kilohms
HDMI IN 1/2:
HDMI:
AUDIO: (HDMI In 2 Only) 500 mVrms (100% modulation)
AUDIO OUT:
500 mVrms (100% modulation)
More than 500 mVrms (Fixed)
PC IN:
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
PC AUDIO INPUT:
Stereo mini jack, 500 mVrms, 47 kilohm
HEADPHONES:
Stereo mini jack
Impedance: 16 ohms
Trademark Information
This TV incorporates High-Definition Multimedia Interface (HDMI™)
technology. HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing
LLC.
Blu-ray is a trademark.
"BRAVIA" and , , BRAVIA
Theatre Sync and DMPORT are trademarks or
registered marks of Sony Corporation.
"PLAYSTATION" is a registered trademark
and "PS3" is a trademark of Sony Computer
Entertainment Inc.
Design and specifi cations are subject to change without notice.
KLV-26M400A/32M400A/37M400A/40M400A
Video:480i, 480p, 720p, 1080i, 1080p
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits
Impedance: 47 kilohms
4