Download  Print this page

Service Data; H/v Center Confirmation And Adjustment - Sony KDF-55WF655K Service Manual

Lcd projection tv.
Hide thumbs

Advertisement

4-5. H/V CENTER CONFIRMATION AND ADJUSTMENTS
Please check the picture horizontal/vertical center after the replacement of the Optics Unit Block Assembly or any part of the Top assembly.
1. Check the H/V center with 480i monoscope signal in "Full" mode.
2. If the center is shifted, adjust using the following service items:
NOTE: Please record the steps shifted as
3. Change the WIDE mode to "Normal" and change the register data as follows:
4.
Display the Twin Picture with the "split" button of the remote commander and change the registers data as follows:
5. Press "Favorites" button and change the registers data as follows:
6. OSD horizontal position must be adjusted as follows:
If above sum exceeds 255, set 1 to "16 RP1H" and set the "sum-256" to "17 RP1L".
Since the registers are different from other cases, be careful to follow complete instructions, and write the data before changing the
display/ wide mode .

4-6. SERVICE DATA

Please refer to the appendix for details.
MDHP and
MDVP
.
MDHP
– 26 –
KDF-55WF655K/60WF655K
RM-KD001
MID-X1 9 MDHP (for H center)
10 MDVP (for H center)
MDVP
MID-X1 9 MDHP +
(Don't change the MDVP data)
MID-X1 9 MDHP +
10 MDVP +
MID-X1 9 MDHP +
10 MDVP +
RM-KD001
MDHP
MDHP
MDVP
MDHP
MDVP

Advertisement

Chapters

Table of Contents

   Related Manuals for Sony KDF-55WF655K

This manual is also suitable for:

Kdf-60wf655k

Comments to this Manuals

Symbols: 0
Latest comments: