Introduction; Standard Package Contents; Installation - Honeywell TE852W User Manual

Long-range weather forecaster with wind speed
Table of Contents

Advertisement

INTRODUCTION

Thank you for selecting the Honeywell Long-Range Weather Forecaster with
Wind Speed. This device combines precise time keeping with monitoring and
displaying the wind speed information and temperature/humidity data from up
to five remote locations.
In this package you will find:
• One main unit (receiver) TE852W
• One three-channel remote temperature and humidity sensor
(transmitter) TS33C
• One Wind Speed Meter (transmitter) TS815
• Mounting Hardware with wrench tool for Wind Speed Meter
• One User Manual
Please keep this manual handy as you use your new item. It contains practical
step-by-step instructions, as well as technical specifications and precautions
you should know.

STANDARD PACKAGE CONTENTS

Picture
4 screws and small wrench tool
Components
Main Unit (receiver)
Thermo Hygrometer Sensor (transmitter)
Wind Speed Meter (transmitter)
Consist of:
Meter Arm, Meter Base and Wind Cups
Mounting hardware
3

INSTALLATION

The Honeywell Weather Forecaster with Wind Speed TE852W operates at
433MHz radio frequency, so no wire installation is required between the main
unit (receiver) and the remote weather sensors (transmitters).
The remote weather sensors include a temperature and humidity sensor and
wind speed sensor. All data measured by these remote sensors is transmitted
to the main unit wirelessly, with the operating range in the open area from 100
feet (30 meters) for wind speed meter up to 328 feet (100 meters) for
temperature and humidity sensor.
Remote wind speed meter must be placed outdoors to measure and transmit a
wind speed data.
Remote thermo-hygrometer(s) can be placed indoors or outdoors, depending
on the area where the temperature and humidity are intended to be
measured. If you intend measuring outdoor temperature and humidity, place
the remote sensor outdoors.
NOTE: It is critical to assemble and power up all remote weather sensors
BEFORE setting up the main unit.
NOTE: It is critical to power up and test communication between the weather
sensors and the main unit BEFORE permanently mounting them outside.
3
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te852elwTs815Td43996615 - hon-te852w

Table of Contents